7 x 14 Mini Metal Lathe 550W Precision Variable Speed 2500 RPM 0.75HP
7″ x 14″ Mini Metal Lathe 550W Precision Variable Speed 2500 RPM 0.75HP. This precision mini lathe is designed to perform various types of processing & cutting jobs like counter face turning, drilling, threading, and bar cutting; this lathe can be used in mini precision parts processing, sample processing and modeling works. Made of high grade iron, the super rigid & heat-treated lathe bed has precision-ground V-slideways. Driven by powerful 550 watt DC motor. The spindle speed is infinitely variable from 50 to 2500RPM. The feed speed can be adjusted according to the requirements of different work pieces. Do NOT change the high/low gear while running. Please slow down the machine before converting high-speed mode into low-speed mode, or the gear may break down. 1 x Lathe Bed. 3 x Work Piece Holder. 11 x POM Gear. 1 x Chuck Wrench. 1 x Open-end Wrench. 1 x Acrylic Cover. 6 x Hex Wrench. 4 x Rubber Washer(with screws). Swing Over Cross Slide. Box Opening Guide (Very Important). Take out the 4 screws (which are used to fix the machine) on the bottom of the box, please refer to the picture below. Then take off the upper lid of the box, please refer to the picture below. Carefully take out the machine from the box, otherwise damages might occur, please refer to the picture below. Your kind consideration would be highly appreciated. Special circumstances will be listed clearly in the listing. If your item has been damaged in transit or. Please do check everything carefully after you received the parcel. The damage except DOA (Dead-On-Arrival) would not be covered if it’s your fault. We believe that it is our vision and mission to provide innovative products with best service and competitive price to satisfy you. Our goal is to make sure that you can find exactly what you are looking for and make it easy for you to place your orders. The item “7 x 14 Mini Metal Lathe 550W Precision Variable Speed 2500 RPM 0.75HP” is in sale since Thursday, November 28, 2019. This item is in the category “Business & Industrial\CNC, Metalworking & Manufacturing\Metalworking Equipment\Metalworking Lathes”. The seller is “premiumautopart” and is located in Carlstadt, New Jersey. This item can be shipped to United States.
- Brand: VEVOR
- Machine Type: Metal Lathe
- MPN: XXZNJ002
- Control: Manual
- Power Source: Electric
- Treated Material: Metal
- Swing Over Bed: 180mm(7.09″)
- Distance Between Centers: 10 in – 20 in
- Power of Motor: 550W DC Single Phase
- Swing Over Cross Slide: 110mm
- Chuck Diameter: 100mm(3.94″)
- Centers Distance: 350mm(13.78″)
- Spindle Bore: 32mm(1.26″)
- Spindle Taper: Mt3
- Tailstock Taper: Mt2
- Cross Slide Travel: 65mm(2.53″)
- Top Slide Travel: 35mm(1.36″)
- Spindle Speed: 0-2250 RPM
- Spindle Accuracy: 0.01mm
- Inch Thread: 12-52 T.P.I
- Metric Thread: 0.5-2.5mm
Categories: mini