Tag : 18k18k
72000 BTU Quad Zone Ductless Mini Split Air Conditioner Heat 18k+18k +18k+18k
5 Ton Quad Zone Mini Ductless Split Air Conditioner 51000 BTU. 72,000 BTU Ductless Mini Split AC. 21 SEER Efficiency w/ Heat Pump Technology. With a 72000 BTU total Cooling-Heating Capacity, this Inverter DC mini split. 72000 BTU Cooling Capacity. (18k + 18k + 18k + 18k). 72000 BTU Heat Pump Capacity. INVERTER DC TECHNOLOGY: 21 SEER. Quad-Zone Setup (4 Air Handlers). Indoor Units – Air Handler. Digital, Multi-function LCD Remote Control. Filtration Screens – Multi Folds Evaporator. When all four air handlers are running simultaneously at full capacity, the total combined BTU output is limited to that of the outdoor condenser. Quad Air Handlers for Multi-Zone Placement. Washable Filters – Biologically Actv Enzyme. Low Startup Temps – MAXIMUM EFFICIENCY. Pre-charged with freon for 100ft of piping. Sleep Mode – 24 hour ON/OFF Timer – Memories. Enhanced Copper Coil – Wide Angle Air Spread. Flexible, Quick Installation – Easy Operation. WHAT IS DC INVERTER? DC Inverter Air Conditioners are the ultimate cooling and heating technology of the HVAC field. They are called “DC inverter” because the alternative current (AC) is converted to Direct Current (DC) then, direct current inverted back to Alternative current with desired frequency. As known, the current supplied through the wall outlet has fixed frequency which is 60 Hertz. Different frequencies supplied to the compressor will result different running speeds of the compressor. YMGI Inverter control systems use Pulse Amplitude Modulation (PAM) that is the most advanced and energy efficient method of inverting the current. DC Inverter air conditioners bear special compressors that their speed could be changed by increasing or decreasing the frequency of the supplied power. Therefore, unlike conventional split Air Contioners/Heat Pumps which cycle between on and off repeatedly, the DC Inverter control system will monitor the room temperature and adjust the compressor speed automatically. Conventional compressors turn on and off to maintain the room temperature at desired level. This will result compressor to draw tremendous energy each time it starts up. This will also reduce the life-span of the compressor and other components that are turning on and off. Once a conventional system is running, it runs at its maximum speed, consuming the maximum amount of energy in order to produce the maximum of cooling or heating to maintain the desired temperature. The system will then cycle between on and off in an effort to maintain this temperature. When a DC Inverter compressor initially starts up, it runs with a higher speed to bring the room temperature to desired level rapidly. Once the set temperature is reached, it slows down and adjust its capacity to counter the heat loss or heat gain of the building. By this way it will maintain a constant temperature. BASIC OVERVIEW: The indoor unit is hung like a picture frame approximately 6 – 8 feet above the floor usually on an exterior wall. A 2-3 inch hole must be made behind the indoor unit in the exterior wall to run the refrigerant copper tubing, electrical wires and the condensate drain to the outside unit. The indoor unit and outdoor unit are connected to each other by means of refrigerant copper tubing and electrical cables. The condensing unit comes pre-charged with Freon however, the lines still need to be vacuumed to evacuate the excess Nitrogen prior to the final coupling for operation. Although the installation may seem easy to some, certain tools and experience is necessary to complete installation of a mini split See Installation Tip. 5 Year Compressor – 1 Year on all other Parts Registration card will be sent with unit, this card should be completed by an HVAC technician (installer). Installation of a mini split must be completed by a licensed HVAC (Heating, ventilating, & air conditioning) company to ensure any issues encountered in the future are not due to improper installation / workmanship. Even though mini split setup is below the expertise requirements of central AC systems, these are not “plug-n-play” units that can be properly installed without certain tools any prior HVAC – electrical knowledge. The installation includes electrical, gas, and refrigerant connections and generally regulated by a multiple sets of laws, codes and guidelines, at the federal, state and local levels. The failure to properly install HVAC equipment can raise personal safety and performance concerns. If you receive a damaged or defective product, a replacement unit will be sent out Free of cost. SOMEBODY MUST BE ON SITE TO ACCEPT / SIGN FOR Order. Only ships to the lower 48 Contiguous United States. Provides Flat even surface – Avoids debris obstruction. Lineset (1/4 x 3/8). Required for Installation 15ft > 75ft Length Options. Mount your condenser at any height on an outdoor sidewall. Required when mounting air handler on Interior wall. 16/4 Electrical Wire Harness – For Extending Evap. Spare remote controls for the T1 Series Ductless System. Available in different sizes – Concels and protects linesets. Permanently Hard Mounts – Programs 7 days a week. Swap 1 – 18k Wall Mount for Ceiling Cassettes. Swap all 4 Wall Mounts for Ceiling Cassettes. Swap 1 – 18k Wall Mount for Susp. View the Mini Split FAQ >. View the Mini Split Outline Diagram >. The item “72000 BTU Quad Zone Ductless Mini Split Air Conditioner Heat 18k+18k +18k+18k” is in sale since Thursday, May 23, 2019. This item is in the category “Home & Garden\Home Improvement\Heating, Cooling & Air\Central Heating & Cooling Systems\Ductless Mini Split Systems”. The seller is “thermospace_acs” and is located in Warren, Michigan. This item can be shipped to United States, Canada.
- BTU Cooling Rating: 25000 BTU or Greater
- Model: WMMS 18k+18k +18k+18k
- Size: 6 tons
- Energy Star: With ENERGY STAR®
- Cooling BTU/Hr: 72000
- SEER: 21
- UPC: Does not apply
- Number of Zones: 4
- Type: Split System
- Timer Control: 24 Hours
- Color: White
- MPN: Does Not Apply
- Number of Heat Settings: Variable
- Brand: YMGI
- Compressor Type: Rotary & Impeller
- Items Included: Remote Control
- Heating System: Split System
- Number of Cool Speeds: Variable
- Blower Motor Speed: Variable Speed
- Power Source: Electric
- Features: Ductless
- Refrigerant: R-410a
- Number of Fan Motors: 1
- Area Covered: Greater Than 1000 sq ft
- Control Style: Digital
- Number of Compressors: 1
- Voltage: 208/230 V
Categories: quad
72000 BTU Quad Zone Ductless Mini Split Air Conditioner Heat 18k+18k +18k+18k
5 Ton Quad Zone Mini Ductless Split Air Conditioner 51000 BTU. 72,000 BTU Ductless Mini Split AC. 21 SEER Efficiency w/ Heat Pump Technology. With a 72000 BTU total Cooling-Heating Capacity, this Inverter DC mini split. 72000 BTU Cooling Capacity. (18k + 18k + 18k + 18k). 72000 BTU Heat Pump Capacity. INVERTER DC TECHNOLOGY: 21 SEER. Quad-Zone Setup (4 Air Handlers). Indoor Units – Air Handler. Digital, Multi-function LCD Remote Control. Filtration Screens – Multi Folds Evaporator. When all four air handlers are running simultaneously at full capacity, the total combined BTU output is limited to that of the outdoor condenser. Quad Air Handlers for Multi-Zone Placement. Washable Filters – Biologically Actv Enzyme. Low Startup Temps – MAXIMUM EFFICIENCY. Pre-charged with freon for 100ft of piping. Sleep Mode – 24 hour ON/OFF Timer – Memories. Enhanced Copper Coil – Wide Angle Air Spread. Flexible, Quick Installation – Easy Operation. WHAT IS DC INVERTER? DC Inverter Air Conditioners are the ultimate cooling and heating technology of the HVAC field. They are called “DC inverter” because the alternative current (AC) is converted to Direct Current (DC) then, direct current inverted back to Alternative current with desired frequency. As known, the current supplied through the wall outlet has fixed frequency which is 60 Hertz. Different frequencies supplied to the compressor will result different running speeds of the compressor. YMGI Inverter control systems use Pulse Amplitude Modulation (PAM) that is the most advanced and energy efficient method of inverting the current. DC Inverter air conditioners bear special compressors that their speed could be changed by increasing or decreasing the frequency of the supplied power. Therefore, unlike conventional split Air Contioners/Heat Pumps which cycle between on and off repeatedly, the DC Inverter control system will monitor the room temperature and adjust the compressor speed automatically. Conventional compressors turn on and off to maintain the room temperature at desired level. This will result compressor to draw tremendous energy each time it starts up. This will also reduce the life-span of the compressor and other components that are turning on and off. Once a conventional system is running, it runs at its maximum speed, consuming the maximum amount of energy in order to produce the maximum of cooling or heating to maintain the desired temperature. The system will then cycle between on and off in an effort to maintain this temperature. When a DC Inverter compressor initially starts up, it runs with a higher speed to bring the room temperature to desired level rapidly. Once the set temperature is reached, it slows down and adjust its capacity to counter the heat loss or heat gain of the building. By this way it will maintain a constant temperature. BASIC OVERVIEW: The indoor unit is hung like a picture frame approximately 6 – 8 feet above the floor usually on an exterior wall. A 2-3 inch hole must be made behind the indoor unit in the exterior wall to run the refrigerant copper tubing, electrical wires and the condensate drain to the outside unit. The indoor unit and outdoor unit are connected to each other by means of refrigerant copper tubing and electrical cables. The condensing unit comes pre-charged with Freon however, the lines still need to be vacuumed to evacuate the excess Nitrogen prior to the final coupling for operation. Although the installation may seem easy to some, certain tools and experience is necessary to complete installation of a mini split See Installation Tip. 5 Year Compressor – 1 Year on all other Parts Registration card will be sent with unit, this card should be completed by an HVAC technician (installer). Installation of a mini split must be completed by a licensed HVAC (Heating, ventilating, & air conditioning) company to ensure any issues encountered in the future are not due to improper installation / workmanship. Even though mini split setup is below the expertise requirements of central AC systems, these are not “plug-n-play” units that can be properly installed without certain tools any prior HVAC – electrical knowledge. The installation includes electrical, gas, and refrigerant connections and generally regulated by a multiple sets of laws, codes and guidelines, at the federal, state and local levels. The failure to properly install HVAC equipment can raise personal safety and performance concerns. If you receive a damaged or defective product, a replacement unit will be sent out Free of cost. SOMEBODY MUST BE ON SITE TO ACCEPT / SIGN FOR Order. Only ships to the lower 48 Contiguous United States. Provides Flat even surface – Avoids debris obstruction. Lineset (1/4 x 3/8). Required for Installation 15ft > 75ft Length Options. Mount your condenser at any height on an outdoor sidewall. Required when mounting air handler on Interior wall. 16/4 Electrical Wire Harness – For Extending Evap. Spare remote controls for the T1 Series Ductless System. Available in different sizes – Concels and protects linesets. Permanently Hard Mounts – Programs 7 days a week. Swap 1 – 18k Wall Mount for Ceiling Cassettes. Swap all 4 Wall Mounts for Ceiling Cassettes. Swap 1 – 18k Wall Mount for Susp. View the Mini Split FAQ >. View the Mini Split Outline Diagram >. The item “72000 BTU Quad Zone Ductless Mini Split Air Conditioner Heat 18k+18k +18k+18k” is in sale since Wednesday, May 22, 2019. This item is in the category “Home & Garden\Home Improvement\Heating, Cooling & Air\Central Heating & Cooling Systems\Ductless Mini Split Systems”. The seller is “hvac-usa” and is located in Warren, Michigan. This item can be shipped to United States, Canada.
- Size: 6 tons
- Cooling BTU/Hr: 72000
- Power Source: Electric
- Model: WMMS 18k+18k +18k+18k
- Energy Star: Compliant
- Type: Ductless Mini-Split with Heat Pump
- Features: Ductless
- MPN: Does Not Apply
- SEER: 21
- Brand: Thermocore Systems
- Smart Home Protocol: Infrared
- Number of Heat Settings: Variable
- Power Phase: 1 Phase
- Voltage: 208/230 V
- Refrigerant: R-410a
- Number of Compressors: 1
- Compressor Type: Rotary & Impeller
- Number of Cool Speeds: Variable
- Material: Aluminum
- Mounting Location: Wall
- Manufacturer Warranty: Other: See Item Description
- Number of Fan Motors: 1
- Heating System: Heat Pump
- Year Manufactured: 2019
- Items Included: Drain Hose
- Blower Motor Speed: Variable Speed
- Color: White
Categories: quad