Tag : heat-treated
Mini Metal Lathe Bed 550W with Heat-Treated Lathe Bed Variable Speed 2250 RPM
Mini Metal Lathe Bed 550W w/ Heat-Treated Lathe Bed Variable Speed 2250 RPM. This 550W 7″ X 14″ Variable-speed Mini Benchtop Metal Lathe With Nylon Gears features a 3-jaw chuck, an MT3 spindle taper, an MT2 tailstock taper, a tool rest and a 3/4 HP motor, designed to perform various types of metal turning, simple to operate. Through high-frequency quenching process and precision grinding of high-quality cast iron bed. 50-2250Rpm spindle speed sub-level of two tranches spindle gear change speed control, continuously adjustable. The mini metal lathe bed is made of high-grade iron. Equipped with nylon gears, this lathe machine is wear-resistant, durable, more accurate rotation and professional. Mini metal lathe power of motor: 550W. The full-length splashguard provides maximum protection. Spindle speed from 50-2250 Rpm. Forward and reverse in all speeds. Operate either manually or with the adjustable auto feed rate. The handedness and accuracy of the v-slideways are obtained by raw material, heat hardening and grinding. Emergency stop button included. Mini metal lathe chuck, 3-jaw self-centering chuck, for setting cylindrical materials steadily. Spindle is supported by precision tapered roller bearings, spindle accuracy within 0.0004(0.01mm). The mini metal lathe quick change tool post can achieve positions of internal cutting, face cutting, and bevel cutting by changing the tool post angle and adjusting the compound rest. The professional cross slide is designed with abrasive resistance, moving blades freely with a feed rod. WIDE APPLICATION- Driven by DC motor. This mini metal lathe cut off tool can be used in areas such as mini precision parts processing, sample processing, and modeling works. Distance Between Centers:14350mm. Swing Over Bed: 7(180mm). Swing Over Cross Slide: 110mm. Chuck Diameter: 100mm(3.94). Cross Slide Travel: 65mm(2.53). Top Slide Travel: 35mm(1.36). Spindle Accuracy: 0.01mm. Spindle Speed:50-2250±10 RPM. Gear Material: Plastic Nylon. Inch Thread: 12-52 T. Metric Thread: 0.5-2.5mm. 1 x Lathe Bed. 3 x Work Piece Holder. 11 x POM Gear. 1 x Chuck Wrench. 1 x Open-end Wrench. 1 x Acrylic Cover. 6 x Hex Wrench. 4 x Rubber Washer(with screws). Box Opening Guide (Very Important). Take out the 4 screws (which are used to fix the machine) on the bottom of the box, please refer to the picture below. Then take off the upper lid of the box, please refer to the picture below. Carefully take out the machine from the box, otherwise damages might occur, please refer to the picture below. Your kind consideration would be highly appreciated. Special circumstances will be listed clearly in the listing. If your item has been damaged in transit or. Please do check everything carefully after you received the parcel. The damage except DOA (Dead-On-Arrival) would not be covered if it’s your fault. We believe that it is our vision and mission to provide innovative products with best service and competitive price to satisfy you. Our goal is to make sure that you can find exactly what you are looking for and make it easy for you to place your orders. The item “Mini Metal Lathe Bed 550W with Heat-Treated Lathe Bed Variable Speed 2250 RPM” is in sale since Wednesday, January 15, 2020. This item is in the category “Business & Industrial\CNC, Metalworking & Manufacturing\Metalworking Equipment\Metalworking Lathes”. The seller is “duanzhihuausha” and is located in Memphis, Tennessee. This item can be shipped to United States.
- Brand: Preenex
- Machine Type: Metal Lathe
- MPN: XXZNJ002
- Control: Manual
- Power Source: Electric
- Treated Material: Metal
- Swing Over Bed: 180mm(7.09″)
- Phase: Single
- Distance Between Centers: 10 in – 20 in
- Power of Motor: 550W DC
- Swing Over Cross Slide: 110mm
- Chuck Diameter: 100mm(3.94″)
- Centers Distance: 350mm(13.78″)
- Spindle Bore: 20mm
- Spindle Taper: Mt3
- Tailstock Taper: Mt2
- Cross Slide Travel: 65mm(2.53″)
- Top Slide Travel: 35mm(1.36″)
- Spindle Speed: 50-2250±10 RPM
- Spindle Accuracy: 0.01mm
- Inch Thread: 12-52 T.P.I
- Metric Thread: 0.5-2.5mm
- Volt: 110V 60HZ
- Gear Material: Plastic Nylon
Categories: mini
7 x 14Mini Metal Lathe Machine 550W Variable Speed with Heat-Treated Lathe Bed
7″ x 14″Mini Metal Lathe Machine 550W Variable Speed with Heat-Treated Lathe Bed. This 550W 7″ X 14″ Variable-speed Mini Benchtop Metal Lathe With Nylon Gears features a 3-jaw chuck, an MT3 spindle taper, an MT2 tailstock taper, a tool rest and a 3/4 HP motor, designed to perform various types of metal turning, simple to operate. Through high-frequency quenching process and precision grinding of high-quality cast iron bed. 50-2250Rpm spindle speed sub-level of two tranches spindle gear change speed control, continuously adjustable. The mini metal lathe bed is made of high-grade iron. Equipped with nylon gears, this lathe machine is wear-resistant, durable, more accurate rotation and professional. Mini metal lathe power of motor: 550W. The full-length splashguard provides maximum protection. Spindle speed from 50-2250 Rpm. Forward and reverse in all speeds. Operate either manually or with the adjustable auto feed rate. The handedness and accuracy of the v-slideways are obtained by raw material, heat hardening and grinding. Emergency stop button included. Mini metal lathe chuck, 3-jaw self-centering chuck, for setting cylindrical materials steadily. Spindle is supported by precision tapered roller bearings, spindle accuracy within 0.0004(0.01mm). The mini metal lathe quick change tool post can achieve positions of internal cutting, face cutting, and bevel cutting by changing the tool post angle and adjusting the compound rest. The professional cross slide is designed with abrasive resistance, moving blades freely with a feed rod. WIDE APPLICATION- Driven by DC motor. This mini metal lathe cut off tool can be used in areas such as mini precision parts processing, sample processing, and modeling works. Distance Between Centers:14350mm. Swing Over Bed: 7(180mm). Swing Over Cross Slide: 110mm. Chuck Diameter: 100mm(3.94). Cross Slide Travel: 65mm(2.53). Top Slide Travel: 35mm(1.36). Spindle Accuracy: 0.01mm. Spindle Speed:50-2250±10 RPM. Gear Material: Plastic Nylon. Inch Thread: 12-52 T. Metric Thread: 0.5-2.5mm. 1 x Lathe Bed. 3 x Work Piece Holder. 11 x POM Gear. 1 x Chuck Wrench. 1 x Open-end Wrench. 1 x Acrylic Cover. 6 x Hex Wrench. 4 x Rubber Washer(with screws). Box Opening Guide (Very Important). Take out the 4 screws (which are used to fix the machine) on the bottom of the box, please refer to the picture below. Then take off the upper lid of the box, please refer to the picture below. Carefully take out the machine from the box, otherwise damages might occur, please refer to the picture below. Your kind consideration would be highly appreciated. Special circumstances will be listed clearly in the listing. If your item has been damaged in transit or. Please do check everything carefully after you received the parcel. The damage except DOA (Dead-On-Arrival) would not be covered if it’s your fault. We believe that it is our vision and mission to provide innovative products with best service and competitive price to satisfy you. Our goal is to make sure that you can find exactly what you are looking for and make it easy for you to place your orders. The item “7 x 14Mini Metal Lathe Machine 550W Variable Speed with Heat-Treated Lathe Bed” is in sale since Wednesday, January 15, 2020. This item is in the category “Business & Industrial\CNC, Metalworking & Manufacturing\Metalworking Equipment\Metalworking Lathes”. The seller is “globalfreeshipping” and is located in Memphis, Tennessee. This item can be shipped to United States.
- Brand: Preenex
- Machine Type: Metal Lathe
- MPN: XXZNJ002
- Control: Manual
- Power Source: Electric
- Treated Material: Metal
- Swing Over Bed: 180mm(7.09″)
- Phase: Single
- Distance Between Centers: 10 in – 20 in
- Power of Motor: 550W DC
- Swing Over Cross Slide: 110mm
- Chuck Diameter: 100mm(3.94″)
- Centers Distance: 350mm(13.78″)
- Spindle Bore: 20mm
- Spindle Taper: Mt3
- Tailstock Taper: Mt2
- Cross Slide Travel: 65mm(2.53″)
- Top Slide Travel: 35mm(1.36″)
- Spindle Speed: 50-2250±10 RPM
- Spindle Accuracy: 0.01mm
- Inch Thread: 12-52 T.P.I
- Metric Thread: 0.5-2.5mm
- Volt: 110V 60HZ
- Gear Material: Plastic Nylon
Categories: 14mini
Mini Metal Lathe Bed 550W with Heat-Treated Lathe Bed Variable Speed 2250 RPM
Mini Metal Lathe Bed 550W w/ Heat-Treated Lathe Bed Variable Speed 0-2500 RPM. This precision mini lathe is designed to perform various types of processing & cutting jobs like counter face turning, drilling, threading, and bar cutting; this lathe can be used in mini precision parts processing, sample processing and modeling works. Made of high grade iron, the super rigid & heat-treated lathe bed has precision-ground V-slideways. Driven by powerful 550 watt DC motor. The spindle speed is infinitely variable from 50 to 2500RPM. The feed speed can be adjusted according to the requirements of different work pieces. Do NOT change the high/low gear while running. Please slow down the machine before converting high-speed mode into low-speed mode, or the gear may break down. SPECIFICATIONS: Distance Between Centers: 14″ Swing Over Bed: 7″ Swing Over Cross Slide: 110mm Spindle Taper: Mt3 Tailstock Taper: Mt2 Chuck Diameter: 100mm Spindle Bore: 20mm Cross Slide Travel: 65mm Top Slide Travel: 35mm Spindle Accuracy: 0.01mm Spindle Speed: 50-2250±10 RPM Motor Power: 550W Gear Material: Plastic Nylon Inch Thread: 12-52 T. I Metric Thread: 0.5-2.5mm Treated Material: Metal. PACKAGE LIST 1 x Lathe Bed 1 x Tray 3 x Work Piece Holder 11 x POM Gear 1 x Chuck Wrench 1 x Center 1 x Open-end Wrench 1 x Oiler 1 x Handle Wheel 1 x Acrylic Cover 6 x Hex Wrench 4 x Rubber Washer(with screws). Box Opening Guide (Very Important) Take out the 4 screws (which are used to fix the machine) on the bottom of the box, please refer to the picture below Then take off the upper lid of the box, please refer to the picture below. Your kind consideration would be highly appreciated. Special circumstances will be listed clearly in the listing. If your item has been damaged in transit or. Please do check everything carefully after you received the parcel. The damage except DOA (Dead-On-Arrival) would not be covered if it’s your fault. We believe that it is our vision and mission to provide innovative products with best service and competitive price to satisfy you. Our goal is to make sure that you can find exactly what you are looking for and make it easy for you to place your orders. The item “Mini Metal Lathe Bed 550W with Heat-Treated Lathe Bed Variable Speed 2250 RPM” is in sale since Friday, April 26, 2019. This item is in the category “Business & Industrial\CNC, Metalworking & Manufacturing\Metalworking Equipment\Metalworking Lathes”. The seller is “freeshipping2you” and is located in Anaheim, California. This item can be shipped to United States.
- Brand: Preenex
- MPN: Does not apply
- Treated Material: Metal
- Swing Over Bed: 7″
- Distance Between Centers: 14″
- Swing Over Cross Slide: 110mm
- Spindle Taper: Mt3
- Tailstock Taper: Mt2
- Chuck Diameter: 100mm
- Spindle Bore: 20mm
- Cross Slide Travel: 65mm
- Top Slide Travel: 35mm
- Spindle Accuracy: 0.01mm
- Spindle Speed: 0-2500 RPM
- Motor Power: 550w
- Manufacturer Part Number: Does not apply
- Gear Material: Plastic Nylon
- Inch Thread: 12-52 T.P.I
- Metric Thread: 0.5-2.5mm
Categories: mini