Tag : lathe

7_x_14_Mini_Metal_Lathe_550W_Precision_Variable_Speed_2500_RPM_0_75HP_01_idkj

7 x 14 Mini Metal Lathe 550W Precision Variable Speed 2500 RPM 0.75HP

7 x 14 Mini Metal Lathe 550W Precision Variable Speed 2500 RPM 0.75HP
7 x 14 Mini Metal Lathe 550W Precision Variable Speed 2500 RPM 0.75HP
7 x 14 Mini Metal Lathe 550W Precision Variable Speed 2500 RPM 0.75HP
7 x 14 Mini Metal Lathe 550W Precision Variable Speed 2500 RPM 0.75HP
7 x 14 Mini Metal Lathe 550W Precision Variable Speed 2500 RPM 0.75HP
7 x 14 Mini Metal Lathe 550W Precision Variable Speed 2500 RPM 0.75HP
7 x 14 Mini Metal Lathe 550W Precision Variable Speed 2500 RPM 0.75HP
7 x 14 Mini Metal Lathe 550W Precision Variable Speed 2500 RPM 0.75HP
7 x 14 Mini Metal Lathe 550W Precision Variable Speed 2500 RPM 0.75HP
7 x 14 Mini Metal Lathe 550W Precision Variable Speed 2500 RPM 0.75HP
7 x 14 Mini Metal Lathe 550W Precision Variable Speed 2500 RPM 0.75HP
7 x 14 Mini Metal Lathe 550W Precision Variable Speed 2500 RPM 0.75HP

7 x 14 Mini Metal Lathe 550W Precision Variable Speed 2500 RPM 0.75HP
7″ x 14″ Mini Metal Lathe 550W Precision Variable Speed 2500 RPM 0.75HP. This precision mini lathe is designed to perform various types of processing & cutting jobs like counter face turning, drilling, threading, and bar cutting; this lathe can be used in mini precision parts processing, sample processing and modeling works. Made of high grade iron, the super rigid & heat-treated lathe bed has precision-ground V-slideways. Driven by powerful 550 watt DC motor. The spindle speed is infinitely variable from 50 to 2500RPM. The feed speed can be adjusted according to the requirements of different work pieces. Do NOT change the high/low gear while running. Please slow down the machine before converting high-speed mode into low-speed mode, or the gear may break down. 1 x Lathe Bed. 3 x Work Piece Holder. 11 x POM Gear. 1 x Chuck Wrench. 1 x Open-end Wrench. 1 x Acrylic Cover. 6 x Hex Wrench. 4 x Rubber Washer(with screws). Swing Over Cross Slide. Box Opening Guide (Very Important). Take out the 4 screws (which are used to fix the machine) on the bottom of the box, please refer to the picture below. Then take off the upper lid of the box, please refer to the picture below. Carefully take out the machine from the box, otherwise damages might occur, please refer to the picture below. Your kind consideration would be highly appreciated. Special circumstances will be listed clearly in the listing. If your item has been damaged in transit or. Please do check everything carefully after you received the parcel. The damage except DOA (Dead-On-Arrival) would not be covered if it’s your fault. We believe that it is our vision and mission to provide innovative products with best service and competitive price to satisfy you. Our goal is to make sure that you can find exactly what you are looking for and make it easy for you to place your orders. The item “7 x 14 Mini Metal Lathe 550W Precision Variable Speed 2500 RPM 0.75HP” is in sale since Thursday, November 28, 2019. This item is in the category “Business & Industrial\CNC, Metalworking & Manufacturing\Metalworking Equipment\Metalworking Lathes”. The seller is “premiumautopart” and is located in Carlstadt, New Jersey. This item can be shipped to United States.
  • Brand: VEVOR
  • Machine Type: Metal Lathe
  • MPN: XXZNJ002
  • Control: Manual
  • Power Source: Electric
  • Treated Material: Metal
  • Swing Over Bed: 180mm(7.09″)
  • Distance Between Centers: 10 in – 20 in
  • Power of Motor: 550W DC Single Phase
  • Swing Over Cross Slide: 110mm
  • Chuck Diameter: 100mm(3.94″)
  • Centers Distance: 350mm(13.78″)
  • Spindle Bore: 32mm(1.26″)
  • Spindle Taper: Mt3
  • Tailstock Taper: Mt2
  • Cross Slide Travel: 65mm(2.53″)
  • Top Slide Travel: 35mm(1.36″)
  • Spindle Speed: 0-2250 RPM
  • Spindle Accuracy: 0.01mm
  • Inch Thread: 12-52 T.P.I
  • Metric Thread: 0.5-2.5mm

7 x 14 Mini Metal Lathe 550W Precision Variable Speed 2500 RPM 0.75HP

Categories: mini

7x14_Mini_Metal_Lathe_Precision_Metalworking_DIY_Processing_Variable_Speed_01_znj

7×14 Mini Metal Lathe Precision Metalworking DIY Processing Variable Speed

7x14 Mini Metal Lathe Precision Metalworking DIY Processing Variable Speed
7x14 Mini Metal Lathe Precision Metalworking DIY Processing Variable Speed
7x14 Mini Metal Lathe Precision Metalworking DIY Processing Variable Speed
7x14 Mini Metal Lathe Precision Metalworking DIY Processing Variable Speed
7x14 Mini Metal Lathe Precision Metalworking DIY Processing Variable Speed
7x14 Mini Metal Lathe Precision Metalworking DIY Processing Variable Speed
7x14 Mini Metal Lathe Precision Metalworking DIY Processing Variable Speed
7x14 Mini Metal Lathe Precision Metalworking DIY Processing Variable Speed
7x14 Mini Metal Lathe Precision Metalworking DIY Processing Variable Speed
7x14 Mini Metal Lathe Precision Metalworking DIY Processing Variable Speed

7x14 Mini Metal Lathe Precision Metalworking DIY Processing Variable Speed
The mini metal lathe bed is made of high grade iron. Nylon gears, this lathe machine is wear-resistant, durable, more accurate rotation and professional. Mini metal lathe power of motor: 550W. The full-length splashguard provides maximum protection. INFINITELY VARIABLE SPEEDS- Variable speed from 0-2250 Rpm. Forward and reverse in all speeds. Operate either manually or with the adjustable auto feed rate. The handness and accuracy of the v-slideways are obtained by raw material, heat hardening and grinding. Emergency stop buttom included. ACCURATE 3-JAW CHUCK- Mini metal lathe chuck, 3-jaw self-centering chuck, for setting cylindrical materials steadily. Spindle is supported by precision tapered roller bearings, spindle accuracy within 0.0004. PROFESSIONAL COMPOUND REST- The mini metal lathe quick change tool post can achieve positions of internal cutting, face cutting and bevel cutting by changing the tool post angle and adjusting the compound rest. Professional cross slide is designed with abrasive resistance, moving blades freely with feed rod. Driven by DC motor, this mini metal lathe cut off tool can be used in areas such as mini precision parts processing, sample processing and modeling works. Heavy & Sturdy Machine. Features a 7 inch swing over bed, 13.78 inch distance between centers and 20mm spindle bore. A thread range of 12-52 TPI. Threading dial indicator and standard and metric handwheel graduations. Variable speed from 0-2250 Rpm. The feed speed can be adjusted according to the requirements of different workpieces. 3-jaw self-centering chuck has gone tested with accuracy and repeatability to set cylindrical materials steadily. Spindle is supported by precision tapered roller bearings, spindle accuracy within 0.01mm. T-slotted compound slide with four-way tool post, 4 blades avaliable at most, easy to change quickly. Bevel cutting can be made by adjusting the angle of the compound rest with the lever. Designed with abrasive resistance, moving blades freely with feed rod. 16 TPI reversible lead screw. The v-slideways with distance between center: 350mm(13.78). Suitable for processing jobs, like counter face turning, driling, threading and cutting jobs on materials made up of round bar. All accessories are well packed. Variable-speed Metal Lathe With. The 7 x 14 Inch Precision Mini Benchtop Lathe features a 3-jaw chuck, a MT3 spindle taper, a MT2 tailstock taper, a tool rest and a 3/4 HP motor, designed to perform various types of metal turning. Through high frequency quenching process and precision grinding of high-quality cast iron bed. 0-2250Rpm spindle speed sub-level of two tranches spindle gear change speed control, continuously adjustable. A movable lamp is free for you. Power of Motor: 550W DC Single Phase. Spindle Speed: 0-2500 RPM. Swing Over Bed: 180mm(7.09). Swing Over Cross Slide: 110mm. Chuck Diameter: 100mm(3.94). Distance: 350mm(13.78). Spindle Bore: 32mm(1.26). Cross Slide Travel: 65mm(2.53). Top Slide Travel: 35mm(1.36). Spindle Accuracy: 0.01mm. Metric Thread: 0.5-2.5mm. 1 x Mini Metal Lathe. 7″ x 12″ Mini Metal Lathe. 8″ x 16″ Mini Metal Lathe. K11 Series Lathe Chuck. K12 Series Lathe Chuck. 18pcs Lathe Gear Kits. We believe that it is our vision and mission to provide innovative products with best service and competitive price to satisfy you. Our goal is to make sure that you can find exactly what you are looking for and make it easy for you to place your orders. California Warehouse: City of Industry, CA. If you need to return, please check twice to confirm the item not work and contact our customer service representative, let us know the detailed problem and send us some pictures for confirmation. Please make sure that item has NO man-made sabotage. Used items will not be accepted for return. All emails will be responded to within. Special circumstances will be listed clearly in the listing. Please do check everything carefully after you received the parcel, any the damage except DOA (Dead-On-Arrival) would not be covered if it’s your fault. Caifornia Warehouse: 18501 Arenth Ave, City of Industry, CA 91748. 300 W Airtex Blvd, Suite 200, Houston, TX 77090. 2125 Gateway Blvd, Hebron, KY 41048. 1000 High Street, Perth Amboy, NJ 08861. The item “7×14 Mini Metal Lathe Precision Metalworking DIY Processing Variable Speed” is in sale since Monday, November 25, 2019. This item is in the category “Business & Industrial\CNC, Metalworking & Manufacturing\Metalworking Equipment\Metalworking Lathes”. The seller is “ganfeii1_4″ and is located in Rowland Heights, California. This item can be shipped to United States, Canada, Mexico.
  • Brand: VEVOR
  • MPN: NJGTL0040
  • Power Source: Electric
  • Swing Over Bed: 180mm(7.09″)
  • Distance Between Centers: 10 in – 20 in
  • Control: Manual
  • Machine Type: Metal Lathe
  • Treated Material: Metal
  • Power of Motor: 550W DC Single Phase
  • Swing Over Cross Slide: 110mm
  • Chuck Diameter: 100mm(3.94″)
  • Centers Distance: 350mm(13.78″)
  • Spindle Bore: 32mm(1.26″)
  • Spindle Taper: Mt3
  • Tailstock Taper: Mt2
  • Cross Slide Travel: 65mm(2.53″)
  • Top Slide Travel: 35mm(1.36″)
  • Spindle Speed: 0-2250 RPM
  • Spindle Accuracy: 0.01mm
  • Inch Thread: 12-52 T.P.I
  • Metric Thread: 0.5-2.5mm

7x14 Mini Metal Lathe Precision Metalworking DIY Processing Variable Speed

Categories: 7x14

550W_7x12_Metal_Mini_Lathe_Luxury_Accessory_Package_50_2500RPM_Variable_Speed_01_bxyu

550W 7×12 Metal Mini Lathe Luxury Accessory Package 50-2500RPM Variable Speed

550W 7x12 Metal Mini Lathe Luxury Accessory Package 50-2500RPM Variable Speed
550W 7x12 Metal Mini Lathe Luxury Accessory Package 50-2500RPM Variable Speed
550W 7x12 Metal Mini Lathe Luxury Accessory Package 50-2500RPM Variable Speed
550W 7x12 Metal Mini Lathe Luxury Accessory Package 50-2500RPM Variable Speed
550W 7x12 Metal Mini Lathe Luxury Accessory Package 50-2500RPM Variable Speed
550W 7x12 Metal Mini Lathe Luxury Accessory Package 50-2500RPM Variable Speed
550W 7x12 Metal Mini Lathe Luxury Accessory Package 50-2500RPM Variable Speed
550W 7x12 Metal Mini Lathe Luxury Accessory Package 50-2500RPM Variable Speed
550W 7x12 Metal Mini Lathe Luxury Accessory Package 50-2500RPM Variable Speed
550W 7x12 Metal Mini Lathe Luxury Accessory Package 50-2500RPM Variable Speed
550W 7x12 Metal Mini Lathe Luxury Accessory Package 50-2500RPM Variable Speed
550W 7x12 Metal Mini Lathe Luxury Accessory Package 50-2500RPM Variable Speed

550W 7x12 Metal Mini Lathe Luxury Accessory Package 50-2500RPM Variable Speed
The mini metal lathe bed is made of high grade iron. Nylon gears, this lathe machine is wear-resistant, durable, more accurate rotation and professional. Mini metal lathe power of motor: 550W. The full-length splashguard provides maximum protection. INFINITELY VARIABLE SPEEDS- 50-2500RPM spindle speed sub-level of two tranches spindle gear change speed control, continuously adjustable. Forward and reverse in all speeds. Operate either manually or with the adjustable auto feed rate. The handness and accuracy of the v-slideways are obtained by raw material, heat hardening and grinding. Emergency stop buttom included. ACCURATE 3-JAW CHUCK- Mini metal lathe chuck, 3-jaw self-centering chuck, for setting cylindrical materials steadily. Spindle is supported by precision tapered roller bearings, spindle accuracy within 0.01mm. A free lamp, 1x 4-Jaw Independent Chuck, 1x. Quick Change Tool Post. And 4x Engineers Measuring Kit are included. PROFESSIONAL COMPOUND REST- The mini metal lathe quick change tool post can achieve positions of internal cutting, face cutting and bevel cutting by changing the tool post angle and adjusting the compound rest. Professional cross slide is designed with abrasive resistance, moving blades freely with feed rod. Driven by DC motor, this mini metal lathe cut off tool can be used in areas such as mini precision parts processing, sample processing and modeling works. Heavy & Sturdy Machine. Features a 7 inch swing over bed, 11.81 inch distance between centers and 20mm spindle bore. A thread range of 12-52 TPI. Standard and metric handwheel graduations. Variable speed from 50-2500 RPM. The feed speed can be adjusted according to the requirements of different workpieces. 3-jaw self-centering chuck has gone tested with accuracy and repeatability to set cylindrical materials steadily. One free 4-Jaw Independent Chuck for you. T-slotted compound slide with four-way tool post, easy to change quickly. Bevel cutting can be made by adjusting the angle of the compound rest with the lever. Free Quick Change Tool Post. Designed with abrasive resistance, moving blades freely with feed rod. 16 TPI reversible lead screw. The v-slideways with distance between center: 300mm(11.81). A lamp is for acurate operation in a dark environment. Suitable for processing jobs, like counter face turning, driling, threading and cutting jobs on materials made up of round bar. All accessories are well packed. Variable-speed Metal Lathe With A Movable Lamp. & 9 Cutters &. With this lathe you will get a superb workhorse, a guarantee and a full after sales service. The 7 x 12 Inch lathe features a 3-jaw chuck, a MT3 spindle taper, a MT2 tailstock taper, a tool rest and a 3/4 HP motor. 1x free lamp, 1x 4-Jaw Independent Chuck, 1x Quick Change Tool Post Set and 4x Engineers Measuring Kit for free. Power of Motor: 550W DC Single Phase. Swing Over Bed: 180mm(7.09). Chuck Diameter: 80mm(3.15). Distance: 300mm(11.81). Spindle Bore: 21mm(0.83). Metric Thread: 0.5-2.5mm. Net Weight: 50kg(110.23 lb). 1 x Mini Metal Lathe. 1 x Fixed and Travelling Steadies Set. 1 x 4-Jaw Independent Chuck. 1 x Quick Change Tool Post Set. Engineers Measuring Kit (including caliper and outside micrometer). 1 x Movable Lamp. 7″ x 12″ Mini Metal Lathe. 7″ x 14″ Mini Metal Lathe. 8″ x 16″ Mini Metal Lathe. K11 Series Lathe Chuck. 18pcs Lathe Gear Kits. We believe that it is our vision and mission to provide innovative products with best service and competitive price to satisfy you. Our goal is to make sure that you can find exactly what you are looking for and make it easy for you to place your orders. California Warehouse: City of Industry, CA. If you need to return, please check twice to confirm the item not work and contact our customer service representative, let us know the detailed problem and send us some pictures for confirmation. Please make sure that item has NO man-made sabotage. Used items will not be accepted for return. All emails will be responded to within. Special circumstances will be listed clearly in the listing. Please do check everything carefully after you received the parcel, any the damage except DOA (Dead-On-Arrival) would not be covered if it’s your fault. Caifornia Warehouse: 18501 Arenth Ave, City of Industry, CA 91748. 300 W Airtex Blvd, Suite 200, Houston, TX 77090. 2125 Gateway Blvd, Hebron, KY 41048. 1000 High Street, Perth Amboy, NJ 08861. The item “550W 7×12 Metal Mini Lathe Luxury Accessory Package 50-2500RPM Variable Speed” is in sale since Monday, November 25, 2019. This item is in the category “Business & Industrial\CNC, Metalworking & Manufacturing\Metalworking Equipment\Metalworking Lathes”. The seller is “love-happyshopping” and is located in Rowland Heights, California. This item can be shipped to United States, Canada, Mexico.
  • Brand: VEVOR
  • MPN: XZGC500801560484808
  • Power Source: Electric
  • Swing Over Bed: Less than 10 in
  • Distance Between Centers: 10 in – 20 in
  • Control: Manual
  • Chuck Size: 3 in
  • Machine Type: Metal Lathe
  • Treated Material: Metal
  • Power of Motor: 550W DC Single Phase
  • Variable Speed: 50-2500PRM
  • Spindle Bore: 21mm(0.83″)
  • Inch Thread: 12-52 T.P.I
  • Metric Thread: 0.5-2.5mm
  • Net Weight: 50kg(110.23 lb)

550W 7x12 Metal Mini Lathe Luxury Accessory Package 50-2500RPM Variable Speed

Categories: 550w

Rockwell_Machinery_46_450_Variable_Speed_Wood_Lathe_with_Tools_01_xgp

Rockwell Machinery 46-450 Variable Speed Wood Lathe with Tools

Rockwell Machinery 46-450 Variable Speed Wood Lathe with Tools
Rockwell Machinery 46-450 Variable Speed Wood Lathe with Tools
Rockwell Machinery 46-450 Variable Speed Wood Lathe with Tools
Rockwell Machinery 46-450 Variable Speed Wood Lathe with Tools
Rockwell Machinery 46-450 Variable Speed Wood Lathe with Tools
Rockwell Machinery 46-450 Variable Speed Wood Lathe with Tools
Rockwell Machinery 46-450 Variable Speed Wood Lathe with Tools
Rockwell Machinery 46-450 Variable Speed Wood Lathe with Tools
Rockwell Machinery 46-450 Variable Speed Wood Lathe with Tools

Rockwell Machinery 46-450 Variable Speed Wood Lathe with Tools
Rockwell Machinery 46-450 Variable Speed Wood Lathe. Has been sitting for several years, and it is time to move it on. 3/4HP Single Phase – motor is NOT completely wired in. The 3 phase motor was swapped out and we never completed the wiring of the single phase. 3/4hp, 115/230 v, 10.6 / 5.3 a. Includes Shield, tool rests, face plates. Includes a variety of cutting tools, as pictured – over 20 tools included. Variable Speed Adjustment handwheel is not the original, sorry. Also needs a good cleaning. USED – AS-IS, NO Return. The item “Rockwell Machinery 46-450 Variable Speed Wood Lathe with Tools” is in sale since Sunday, November 17, 2019. This item is in the category “Business & Industrial\CNC, Metalworking & Manufacturing\Woodworking Equipment\Lathes”. The seller is “bebbieg” and is located in West Lafayette, Ohio. This item can’t be shipped, the buyer must pick up the item.
  • Machine Type: Manual Lathe
  • Power Source: Electric
  • MPN: Does Not Apply
  • Treated Material: Cast Iron
  • Swing Over Bed: 11.42 in
  • Brand: Delta
  • Control: Manual

Rockwell Machinery 46-450 Variable Speed Wood Lathe with Tools

Categories: rockwell

ROCKWELL_Delta_14_Metal_LATHE_SERIES_25_209_Variable_speed_01_xcv

ROCKWELL-Delta 14 Metal LATHE SERIES 25-209 Variable speed

ROCKWELL-Delta 14 Metal LATHE SERIES 25-209 Variable speed
ROCKWELL-Delta 14 Metal LATHE SERIES 25-209 Variable speed
ROCKWELL-Delta 14 Metal LATHE SERIES 25-209 Variable speed
ROCKWELL-Delta 14 Metal LATHE SERIES 25-209 Variable speed
ROCKWELL-Delta 14 Metal LATHE SERIES 25-209 Variable speed
ROCKWELL-Delta 14 Metal LATHE SERIES 25-209 Variable speed
ROCKWELL-Delta 14 Metal LATHE SERIES 25-209 Variable speed
ROCKWELL-Delta 14 Metal LATHE SERIES 25-209 Variable speed
ROCKWELL-Delta 14 Metal LATHE SERIES 25-209 Variable speed
ROCKWELL-Delta 14 Metal LATHE SERIES 25-209 Variable speed
ROCKWELL-Delta 14 Metal LATHE SERIES 25-209 Variable speed

ROCKWELL-Delta 14 Metal LATHE SERIES 25-209 Variable speed
ROCKWELL-Delta 14 Metal LATHE SERIES 25-209 Variable speed. Specifications: Swing over bed and saddle wings 14 1/4 Swing over cross slide 9 1/8 Center distance 41 Spindle hole 1 3/8 Spindle speeds, infinitely variable 40-1600 rpm Spindle nose L00 Threads (inch) (54) 4-224 tpi Feeds, longitudinal (54). 052 Motor/electrics 220/440V 3 Phase Currently wired 220V Equipped with. Cabinet with chip and coolant pan. Quick change gear box. Tools shown on picture. This is a used item that has been tested and found to be in working condition. Item comes as pictured. When returning your item you will need to ensure that the package used is in accordance with the carrier requirements for its type and weight. We strive to answer all messages within 24 hours. During the holidays there may be a longer response time. Please feel free to message us with any questions, comments or concerns. Track Page Views With. Auctiva’s FREE Counter. The item “ROCKWELL-Delta 14 Metal LATHE SERIES 25-209 Variable speed” is in sale since Tuesday, December 3, 2019. This item is in the category “Business & Industrial\CNC, Metalworking & Manufacturing\Metalworking Equipment\Metalworking Lathes”. The seller is “toolgeneral” and is located in Fort Worth, Texas. This item can be shipped to United States.
  • Model: 25-209
  • Country/Region of Manufacture: United States
  • Machine Type: Metal Lathe
  • Max Spindle Speed (RPM): 1600
  • Power Source: Electric
  • Distance Between Centers: 41 in
  • MPN: 25-209
  • Swing Over Bed: 14 in
  • Phase: Three
  • Brand: Rockwell Delta
  • Control: Manual

ROCKWELL-Delta 14 Metal LATHE SERIES 25-209 Variable speed

Categories: rockwell-delta

8_x_16_Mini_Metal_Lathe_Bench_Variable_Speed_Digital_RPM_DC_Motor_750W_110V_01_nd

8 x 16 Mini Metal Lathe Bench Variable-Speed Digital RPM DC Motor 750W 110V

8 x 16 Mini Metal Lathe Bench Variable-Speed Digital RPM DC Motor 750W 110V
8 x 16 Mini Metal Lathe Bench Variable-Speed Digital RPM DC Motor 750W 110V
8 x 16 Mini Metal Lathe Bench Variable-Speed Digital RPM DC Motor 750W 110V
8 x 16 Mini Metal Lathe Bench Variable-Speed Digital RPM DC Motor 750W 110V
8 x 16 Mini Metal Lathe Bench Variable-Speed Digital RPM DC Motor 750W 110V
8 x 16 Mini Metal Lathe Bench Variable-Speed Digital RPM DC Motor 750W 110V
8 x 16 Mini Metal Lathe Bench Variable-Speed Digital RPM DC Motor 750W 110V
8 x 16 Mini Metal Lathe Bench Variable-Speed Digital RPM DC Motor 750W 110V
8 x 16 Mini Metal Lathe Bench Variable-Speed Digital RPM DC Motor 750W 110V
8 x 16 Mini Metal Lathe Bench Variable-Speed Digital RPM DC Motor 750W 110V
8 x 16 Mini Metal Lathe Bench Variable-Speed Digital RPM DC Motor 750W 110V
8 x 16 Mini Metal Lathe Bench Variable-Speed Digital RPM DC Motor 750W 110V

8 x 16 Mini Metal Lathe Bench Variable-Speed Digital RPM DC Motor 750W 110V
Spindle Motor and Inverter. Steam generator for bath SPA. 8 x 16 Mini Metal Lathe Bench Variable-Speed Digital RPM DC Motor 750W 110V. This precision mini lathe is designed to perform various types of metal, jade and wood turning. It can be used in areas such as mini precision parts processing, sample processing and modeling works. It is both perfect for hobbyists and modelers who is looking to add finite detail to their construction project. Suitable for turnings of metal, wood, jade, etc. Ideal for use in labs, workshops, engineering and education. Can be turned within foreign aid, turning thread, turning taper and so on. Telescopic sets with scale, you can intuitively see the length of the telescopic handle scale, precise scaling can be digitally standardized or adjusted by lateral movement. By adjusting the speed switch, the spindle speed can be adjusted from 50 to 2500RPM. Equipped with gears of strong power, this machine is wear-resistant, durable, more accurate rotation and in particular, more precise, accurate and professional. Automatic tool with multi function and usage, infinitely variable. More accurate operation, more professional performance. Tail Stock Taper: MT2. Range of Spindle Speeds: 50-2500RPM. Distance Between Centers: 400mm (16). Swing Over Bed: 210mm (8). Chuck Diameter: 125mm (5). Hole Thru Spindle: 38mm (1.5). Maximum Compound Slide Travel: 55mm (2). Maximum Cross Slide Travel: 75mm (3). Gear Parameters On The Machine8072843324 Gear Parameters In The Accessory304050526066. Variable spindle speed of 50-2500RPM. Spindle bearings use precise tapered roller bearings. Rails have been quenched with high frequency and elaborate milling. High precision, able to turn out standard qualified works. 750W strong power, 400mm processing distance. With high precision, can turn out the standard qualified works. Bed saddle tail scale precision, feed more precise fine-tuning, telescopic sleeve scale practical. Multi-function and multi-usage, can be turned within the foreign aid, turning thread, turning taper and so on. Automatic tool, Infinitely variable, professional tool post. Our company is an emerging professional Cross-Border Electronic company. So far we have finished the assets re-organization and obtained wholesale financing. We guarantee every product is of high quality and durable utility compared to other factories becayse we choose the best-buys goods. We are really appreciated if you would like to give us your valuable positive comment(s) after you receive our products, which is a huge encouragement for us to make our products and service better and better. Hope you will love our items. Any questions will be answered promptly, so please feel free to let me know your concern. At present, our company has warehouses in. If you are a U. Transport time will range from 2 to 4 workdays according to your location. Note: American regional AK, HI, PR , are remote areas, these places need to be extra charged. We offer 1-year guarantee. Please do check everything carefully when receiving the package. Failure to do so might result in damage to your own rights and interests. NEW Travel Buckle Lock Adjustable Luggage Straps Tie Down Belt for Baggage Nylon. New Stainless Steel Prawn Peeler Shrimp Deveiner Peel Device Creative Tools. Colorful Travel Adjustable Luggage Straps baggage Buckle Lock Tie Down Belt. Car Emergency Life Saving Hammer Auto Window Seat Safety Belt Cutter Tool. Rocket Rubber Air Dust Blower Pump Cleaner Tool for DSLR Camera Lens Duster New. 6 in1 Keychain Keyring Multi Tool Stainless Screwdriver Camping Tool Good Item. The item “8 x 16 Mini Metal Lathe Bench Variable-Speed Digital RPM DC Motor 750W 110V” is in sale since Wednesday, October 16, 2019. This item is in the category “Business & Industrial\CNC, Metalworking & Manufacturing\Metalworking Equipment\Metalworking Lathes”. The seller is “victory-shipping” and is located in Los Angeles. This item can be shipped to United States.
  • Brand: Tai shi
  • Chuck: 3-jaws
  • Chuck Size: 125mm (5″)
  • Control: CNC
  • Country/Region of Manufacture: China
  • Cross Slide: 117mm
  • Distance Between Centers: 400mm
  • Hole Thru Spindle: 21mm,taper MT#3
  • Machine Type: Metal Lathe
  • Max Spindle Speed (RPM): 50-2500RPM
  • Model: MX-210V
  • Model Year: 2019
  • Motor Power: 750W
  • MPN: VSG2018040703
  • Phase: Single
  • Power Source: Electric
  • Spindle Speed Ranges: Low 50-1250,high 100-2500RPM
  • Swing Over Bed: 210mm
  • Tail Sleeve: 25mm
  • Tailstock: Taper MT#2
  • Treated Material: metal, wood, jade, etc.
  • Voltage: AC110V / 60HZ

8 x 16 Mini Metal Lathe Bench Variable-Speed Digital RPM DC Motor 750W 110V

Categories: mini

Charls_Salzberg_Metal_spinning_lathe_with_HD_Variable_Speed_drive_01_kmsm

Charls Salzberg Metal spinning lathe with HD Variable Speed drive

Charls Salzberg Metal spinning lathe with HD Variable Speed drive
Charls Salzberg Metal spinning lathe with HD Variable Speed drive
Charls Salzberg Metal spinning lathe with HD Variable Speed drive
Charls Salzberg Metal spinning lathe with HD Variable Speed drive
Charls Salzberg Metal spinning lathe with HD Variable Speed drive
Charls Salzberg Metal spinning lathe with HD Variable Speed drive
Charls Salzberg Metal spinning lathe with HD Variable Speed drive
Charls Salzberg Metal spinning lathe with HD Variable Speed drive
Charls Salzberg Metal spinning lathe with HD Variable Speed drive

Charls Salzberg Metal spinning lathe with HD Variable Speed drive
Very nice CHALRS SLAZBERG Metal spinning lathe. 27″ Swing x 30″ Centers. With Tooling as you can see in the pictures. 220 Volt, 3-Phase Electric. A & L Machine and Toll inc. The item “Charls Salzberg Metal spinning lathe with HD Variable Speed drive” is in sale since Thursday, August 15, 2019. This item is in the category “Business & Industrial\CNC, Metalworking & Manufacturing\Metalworking Equipment\Other Metalworking Equipment”. The seller is “almachinery” and is located in Middlesex, New Jersey. This item can be shipped worldwide.
  • Country/Region of Manufacture: Unknown
  • Machine Type: Metal spinning lathe
  • Power Source: Electric
  • MPN: Does Not Apply
  • Brand: Charls Salzberg
  • Control: Manual

Charls Salzberg Metal spinning lathe with HD Variable Speed drive

Categories: charls

Rockwell_Delta_14_Metal_Lathe_Variable_Speed_Model_25_210_01_hnvj

Rockwell-Delta 14 Metal Lathe Variable Speed Model 25-210

Rockwell-Delta 14 Metal Lathe Variable Speed Model 25-210
Rockwell-Delta 14 Metal Lathe Variable Speed Model 25-210
Rockwell-Delta 14 Metal Lathe Variable Speed Model 25-210
Rockwell-Delta 14 Metal Lathe Variable Speed Model 25-210
Rockwell-Delta 14 Metal Lathe Variable Speed Model 25-210
Rockwell-Delta 14 Metal Lathe Variable Speed Model 25-210
Rockwell-Delta 14 Metal Lathe Variable Speed Model 25-210
Rockwell-Delta 14 Metal Lathe Variable Speed Model 25-210
Rockwell-Delta 14 Metal Lathe Variable Speed Model 25-210
Rockwell-Delta 14 Metal Lathe Variable Speed Model 25-210
Rockwell-Delta 14 Metal Lathe Variable Speed Model 25-210
Rockwell-Delta 14 Metal Lathe Variable Speed Model 25-210

Rockwell-Delta 14 Metal Lathe Variable Speed Model 25-210
You are purchasing the following. Rockwell-Delta – 14 Metal Lathe – Variable Speed – Model 25-210. 14″ X 40″ lathe by Rockwell/Delta…….. 28 from chuck to tailstock…….. This lathe is in good, working condition. Besides needing some light cleaning here and there, the only condition issue to make note of with this lathe is that it is missing the two covers that cover up the motor. Please review the photos provided for this listing to get an idea of the condition of this lathe. PLEASE READ before purchasing. Local pick-up is strongly recommended (Located in LINDEN, NJ 07036). THE MACHINE WEIGHS 1800 POUNDS AND WE WILL SECURE IT TO A PALLET AT NO EXTRA COST. PALLET SIZE WILL BE APPROX. Is a dock or forklift on site? If a lift gate is required? We will give you the length, width, height and approx.. If you require a crate, there will be an extra charge. The item “Rockwell-Delta 14 Metal Lathe Variable Speed Model 25-210″ is in sale since Monday, November 11, 2019. This item is in the category “Business & Industrial\CNC, Metalworking & Manufacturing\Metalworking Equipment\Metalworking Lathes”. The seller is “hiperfparts” and is located in Linden, New Jersey. This item can be shipped to United States.
  • Model: 14″
  • Country/Region of Manufacture: United States
  • Machine Type: Lathe
  • Power Source: 220 Volt
  • Distance Between Centers: 42″
  • MPN: 25-210
  • Swing Over Bed: 14″
  • Phase: Three
  • Brand: Rockwell
  • Chuck Size: 9″

Rockwell-Delta 14 Metal Lathe Variable Speed Model 25-210

Categories: rockwell-delta

8_x_16_Variable_Speed_Mini_Metal_Lathe_Bench_Top_Digital_RPM_750W_01_tfx

8 x 16 Variable-Speed Mini Metal Lathe Bench Top Digital RPM 750W

8 x 16 Variable-Speed Mini Metal Lathe Bench Top Digital RPM 750W
8 x 16 Variable-Speed Mini Metal Lathe Bench Top Digital RPM 750W
8 x 16 Variable-Speed Mini Metal Lathe Bench Top Digital RPM 750W
8 x 16 Variable-Speed Mini Metal Lathe Bench Top Digital RPM 750W
8 x 16 Variable-Speed Mini Metal Lathe Bench Top Digital RPM 750W
8 x 16 Variable-Speed Mini Metal Lathe Bench Top Digital RPM 750W
8 x 16 Variable-Speed Mini Metal Lathe Bench Top Digital RPM 750W
8 x 16 Variable-Speed Mini Metal Lathe Bench Top Digital RPM 750W
8 x 16 Variable-Speed Mini Metal Lathe Bench Top Digital RPM 750W
8 x 16 Variable-Speed Mini Metal Lathe Bench Top Digital RPM 750W
8 x 16 Variable-Speed Mini Metal Lathe Bench Top Digital RPM 750W
8 x 16 Variable-Speed Mini Metal Lathe Bench Top Digital RPM 750W

8 x 16 Variable-Speed Mini Metal Lathe Bench Top Digital RPM 750W
Sign up to Newsletters. 8×16 Inch Metal Processing Variable Speed Lathe Metal Lathe. Precision 8″ x 16″ Variable-Speed Lathe. Is designed to perform various types of metal, jade and wood turning. It is perfect for a sturdy workbench or. As a stand-alone unit when mounted on. It can be used in areas such as mini precision parts processing, sample processing and modeling works. It is both perfect for hobbyists and modelers who is looking to add finite detail to their construction project. Read the manual carefully before open the package. Make sure the machine is leveled before Power on the machine. Make sure that the gap between the middle plate or guide is moderate, not too small. Moving the plate by swiving the wheel to make sure the plate can move smoothly. Before starting up, make sure that the voltage is within the working voltage range(230V +/- 10% or 120V+/- 10% base on the products you bought). The cutting amount should be controlled within 1.5 mm for steel or iron , 3 mm for Alumium or copper to prevent damage of the motor or the motor circuit board due to overload. Suitable for turnings of metal, wood, jade, etc. Ideal for use in labs, workshops, engineering and education. Can be turned within foreign aid, turning thread, turning taper and so on. Telescopic sets with scale, you can intuitively see the length of the telescopic handle scale, precise scaling can be digitally standardized or adjusted by lateral movement. Pindle speed can be adjusted from 50 to 2500. Wear-resistant, durable, more accurate rotation and professional. Variable spindle speed of 50-2500 RPM. All metal gears, shell and hand wheel. Igh precision, able to turn out standard qualified works. Nfinitely variable, professional tool post. Telescopic sets with scale. Travel: compound rest 2-1/8 54. Mm, cross slide 3 76. Footprint: 31-1/2″ x 10-1/2″. Main Engine Gross Weight: 128 lbs (58 kg). Main Engine Package Dimensions (L W H): 36 19 17 (91 48 44 cm). 4 3-Jaw(in lathe) and 4-jaw chucks. 4-Way turret tool post (3/8 max tool size). 8″ x 16″ Variable-Speed Lathe. 1 X Tool Storage Box. 1 X Oil Can. 1 X Set of Accessories. 1 X User Manual. NotesPlease note that this is a large cargo. Due to its large size, special logistics is required, and the transport time is longer than normal. Thanks for your understanding. We believe that it is our vision and mission to provide innovative products with best service and competitive price to satisfy you. Our goal is to make sure that you can find exactly what you are looking for and make it easy for you to place your orders. California Warehouse: City of Industry, CA. If you need to return, please check twice to confirm the item not work and contact our customer service representative, let us know the detailed problem and send us some pictures for confirmation. Please make sure that item has NO man-made sabotage. Used items will not be accepted for return. All emails will be responded to within. Special circumstances will be listed clearly in the listing. Please do check everything carefully after you received the parcel, any the damage except DOA (Dead-On-Arrival) would not be covered if it’s your fault. A: The item ships from Rancho Cucamonga, CA, United States. A: Please log on your account. Q: How do I return an item? Please contact our customer service before you return an item. The item “8 x 16 Variable-Speed Mini Metal Lathe Bench Top Digital RPM 750W” is in sale since Wednesday, November 22, 2017. This item is in the category “Business & Industrial\CNC, Metalworking & Manufacturing\Metalworking Equipment\Metalworking Lathes”. The seller is “qiannlan-3″ and is located in Rowland Heights, California. This item can be shipped to United States, Canada, Mexico, Germany.
  • Brand: VEVOR
  • MPN: XCXXZ004
  • Power Source: Electric
  • Swing Over Bed: Less than 10 in
  • Distance Between Centers: 10 in – 20 in
  • Control: Manual
  • Chuck Size: 4 in
  • Machine Type: Metal Lathe
  • Treated Material: Metal
  • Motor Power: 750W
  • Cross Slide: 4-5/8″ (117 mm)
  • Spindle Speed Ranges: Low 50-1250, high 100-2500 RPM
  • Travel: compound rest 2-1/8″ (54 mm), cross slide 3″ (76 mm)
  • Tailstock: Taper MT#2
  • Tail Sleeve: 1″ (25 mm)
  • Inch Threads: 8-44 TPI
  • Metric Threads: 0.5-3.0 mm
  • Footprint: 31-1/2″ x 10-1/2″
  • Spindle Accuracy: 0.0004-0.0012″ (0.01-0.03 mm)
  • Main Engine Gross Weight: 128 lbs (58 kg)
  • Main Engine Package Dimensions (L* W* H): 36* 19* 17″ (91* 48* 44 cm)

8 x 16 Variable-Speed Mini Metal Lathe Bench Top Digital RPM 750W

Categories: variable-speed

NOVA_12_in_X_16_1_2_in_Comet_II_Variable_Speed_Wood_Lathe_01_lyd

NOVA 12 in. X 16 1/2 in. Comet II Variable Speed Wood Lathe

NOVA 12 in. X 16 1/2 in. Comet II Variable Speed Wood Lathe
NOVA 12 in. X 16 1/2 in. Comet II Variable Speed Wood Lathe
NOVA 12 in. X 16 1/2 in. Comet II Variable Speed Wood Lathe
NOVA 12 in. X 16 1/2 in. Comet II Variable Speed Wood Lathe
NOVA 12 in. X 16 1/2 in. Comet II Variable Speed Wood Lathe

NOVA 12 in. X 16 1/2 in. Comet II Variable Speed Wood Lathe
X 16 1/2 in. Comet II Variable Speed Wood Lathe. NOVA 46300 Comets II 12 in. Variable Speed Midi Wood Lathe is the most versatile and innovative smaller lathe on the market today. Portable and space saving, yet delivers the capacity and rugged stability of larger machines. The forward and reversing switch offers additional flexibility for a superior finish. With its 12 in. Swing capacity over bed and 16.5 in. Between center capacities, expandable to 41 in. With the optional bed extension accessory, you can complete a wide variety of projects. By adding the optional accessories you can transform your lathe into a total wood working station. Wood Lathe available in 1 in. Standard equipment: 3/4 HP variable speed motor, 3 in. Faceplate, hand wheel, 6 in. Tool rest, 2MT Drive center, 2MT Live Center, knockout bar, manual and fastenings. Designed by Teknatool International. 3/4 HP electronic variable speed motor. Speed range from 250 to 4000 rpm. Swing over bed and 16.5 in. 3 step pulley system to dial in low, medium and high speed ranges. Bench & Stationary Tool Type: Lathes. Bench or Stationary: Bench. Maximum Speed (rpm): 4000. Minimum speed (rpm): 250. PT Horsepower (Hp): 3/4. Tools Product Type: Power Tool. Certifications and Listings: No Certifications or Listings. All corded products are designed to work with North American 110/120V outlets only. The item “NOVA 12 in. X 16 1/2 in. Comet II Variable Speed Wood Lathe” is in sale since Friday, February 8, 2019. This item is in the category “Business & Industrial\CNC, Metalworking & Manufacturing\Woodworking Equipment\Lathes”. The seller is “justlowcost” and is located in Multiple Locations. This item can be shipped to United States.
  • Type: Lathes
  • Brand: NOVA
  • MPN: 46300
  • Model: 46300
  • UPC: 0669762002280
  • EAN: Does not apply

NOVA 12 in. X 16 1/2 in. Comet II Variable Speed Wood Lathe

Categories: nova