Tag : milling

Bridgeport_Milling_Machine_Variable_Speed_1_1_2_HP_01_fmtj

Bridgeport Milling Machine Variable Speed, 1-1/2 HP

Bridgeport Milling Machine Variable Speed, 1-1/2 HP
Bridgeport Milling Machine Variable Speed, 1-1/2 HP
Bridgeport Milling Machine Variable Speed, 1-1/2 HP
Bridgeport Milling Machine Variable Speed, 1-1/2 HP
Bridgeport Milling Machine Variable Speed, 1-1/2 HP
Bridgeport Milling Machine Variable Speed, 1-1/2 HP
Bridgeport Milling Machine Variable Speed, 1-1/2 HP
Bridgeport Milling Machine Variable Speed, 1-1/2 HP

Bridgeport Milling Machine Variable Speed, 1-1/2 HP
BRIDGEPORT 2J MILLING MACHINE. Variable Speed (60 – 4200 rpm). Dovetail fixture mount on LH side. 9″ x 42″ Table. Power Feed on X-Axis (inop). Condition: Head is quiet. Spindle/bearings replaced and is tight with no play. Table moves smooth on X and Y axis. Quill moves smooth on Z. Table has a few drill marks. Power feed on X-axis is bad. Will come with a clamp down set and some tooling. Not the prettiest paint, but the mill works great. Mill used in a sheet metal shop, but the machine operator passed away some time ago and it has been used mainly to drill holes in sheet metal periodically, then has sat for several years. Workhorse of a mill. We can load this on your trailer. The item “Bridgeport Milling Machine Variable Speed, 1-1/2 HP” is in sale since Wednesday, October 14, 2020. This item is in the category “Business & Industrial\CNC, Metalworking & Manufacturing\Metalworking Equipment\Machining Centers & Milling Machines”. The seller is “powder-pros” and is located in Havelock, North Carolina. This item can’t be shipped, the buyer must pick up the item.
  • Spindle Horsepower: 1-1/2
  • Country/Region of Manufacture: United States
  • Machine Type: Milling Machine
  • Max Spindle Speed (RPM): 4001 – 4500
  • Power Source: Electric
  • Function: Milling
  • Brand: Bridgeport
  • Control: Manual
  • Voltage: 220 V

Bridgeport Milling Machine Variable Speed, 1-1/2 HP

Categories: bridgeport

DoALL_Variable_Speed_Vertical_Mill_Milling_Machine_Power_Feed_54_X_9_Table_01_klv

DoALL Variable Speed Vertical Mill Milling Machine Power Feed 54 X 9 Table

DoALL Variable Speed Vertical Mill Milling Machine Power Feed 54 X 9 Table
DoALL Variable Speed Vertical Mill Milling Machine Power Feed 54 X 9 Table
DoALL Variable Speed Vertical Mill Milling Machine Power Feed 54 X 9 Table
DoALL Variable Speed Vertical Mill Milling Machine Power Feed 54 X 9 Table

DoALL Variable Speed Vertical Mill Milling Machine Power Feed 54 X 9 Table
DoALL Variable Speed Vertical Mill Milling Machine Power Feed – 54″ X 9″ Table. This is a fixed listing for a DoALL Milling Machine. Specifications: Make: DoALL Type: Vertical Mill Table Size: 54″ x 9″ Power Feed Installed Variable Speed: 60-4200 RPM. The mill is exactly as pictured and has been tested to be in operational condition. Special exceptions can be made for customers with UPS accounts if we are notified in a timely fashion. We will load your truck or carrier free of charge at our loading dock. International buyers are always welcomed. Get images that make Supersized seem small. Tailor your auctions with Auctiva’s. The item “DoALL Variable Speed Vertical Mill Milling Machine Power Feed 54 X 9 Table” is in sale since Monday, August 24, 2020. This item is in the category “Business & Industrial\CNC, Metalworking & Manufacturing\Metalworking Equipment\Machining Centers & Milling Machines”. The seller is “dockguys” and is located in Rochester, New York. This item can be shipped worldwide.
  • Brand: DoALL
  • Control: Semi-Automatic
  • Custom Bundle: No
  • Function: Milling
  • MPN: Does not apply
  • Machine Type: Vertical Milling Machine
  • Max Spindle Speed (RPM): 4001 – 4500
  • Modified Item: No
  • Power Source: Electric
  • Table Length: 40 in – 59.9 in
  • Table Width: Less than 10 in

DoALL Variable Speed Vertical Mill Milling Machine Power Feed 54 X 9 Table

Categories: doall

USED_BridgePort_Vertical_3_Axis_CNC_Milling_Machine_with_Boss_8_Controls_DB_01_uvg

USED BridgePort Vertical 3-Axis CNC Milling Machine with Boss-8 Controls (DB)

USED BridgePort Vertical 3-Axis CNC Milling Machine with Boss-8 Controls (DB)
USED BridgePort Vertical 3-Axis CNC Milling Machine with Boss-8 Controls (DB)
USED BridgePort Vertical 3-Axis CNC Milling Machine with Boss-8 Controls (DB)
USED BridgePort Vertical 3-Axis CNC Milling Machine with Boss-8 Controls (DB)
USED BridgePort Vertical 3-Axis CNC Milling Machine with Boss-8 Controls (DB)
USED BridgePort Vertical 3-Axis CNC Milling Machine with Boss-8 Controls (DB)
USED BridgePort Vertical 3-Axis CNC Milling Machine with Boss-8 Controls (DB)
USED BridgePort Vertical 3-Axis CNC Milling Machine with Boss-8 Controls (DB)
USED BridgePort Vertical 3-Axis CNC Milling Machine with Boss-8 Controls (DB)
USED BridgePort Vertical 3-Axis CNC Milling Machine with Boss-8 Controls (DB)
USED BridgePort Vertical 3-Axis CNC Milling Machine with Boss-8 Controls (DB)
USED BridgePort Vertical 3-Axis CNC Milling Machine with Boss-8 Controls (DB)

USED BridgePort Vertical 3-Axis CNC Milling Machine with Boss-8 Controls (DB)
This is a USED BridgePort Vertical, 3-Axis, CNC Milling Machine. It has a NMTB-30 Taper Spindle and 9″ x 42″ table with a variable speed spindle with RPM’s from 60 to 4200. Serial number on the front of the ways is V2E3 246. It features a Boss-8 3-Axis CNC Controller, ball screws, a Kurt Automatic Power Drawbar with lubricator/regulator, work light, way covers and 5 various styles of NMTB-30 holders. Unit is under power and will accept Master Cam software, picture of connecting cord is listed. Has a 2 H. Motor that is 3-Phase and is 230/460 volt. You can run it in all directions, as well as various speeds. This would be the perfect machine to retrofit to new CNC controls. The machine is in excellent condition and has ball screws and the servo motors. If you know CNC controls this would be the machine to update! Check out my other items. E b a y Stores And check out our website with over 300,000 items in stock! It is fully interactive and will show you current pricing and stock availability on thousands of items! Register today to place orders, print statements, expedite orders and more! Also listed will be our toll free telephone and fax numbers for your convenience. Get your copy of our 450 page T&S Catalog, with listings of popular items from all the companies we represent. Direct Links to all our vendors which include some of the top names in the industry; Kennedy, OSG, Iscar, Clausing, Jet, Precision Twist, Wilton, Norton, Starrett, Allied, Mitutoyo, Keo, Brown & Sharpe and Jacobs, just to name a few! WE SPECIALIZE IN CUTTING TOOLS! Hundreds of decimal reamers, including over and under size metric reamers up to 20mm! Hundreds of special taps from #000 to 4, endmills, toolholders, abrasives, fasteners, machinery and much more. Give us a call! The item “USED BridgePort Vertical 3-Axis CNC Milling Machine with Boss-8 Controls (DB)” is in sale since Monday, November 26, 2018. This item is in the category “Business & Industrial\CNC, Metalworking & Manufacturing\Metalworking Equipment\Machining Centers & Milling Machines”. The seller is “tstoolsupplycompany” and is located in Holland, Ohio. This item can’t be shipped, the buyer must pick up the item.
  • Model: 3-Axis CNC
  • Spindle Horsepower: 2 H.P.
  • Country/Region of Manufacture: United States
  • Machine Type: BridgePort CNC Milling Machine
  • Table Length: 42″
  • Power Source: Electric
  • MPN: Variable Speed
  • Spindle Taper: R-8
  • Function: Milling
  • Brand: Bridgeport
  • Table Width: 9″
  • Control: CNC
  • Voltage: 220/440 Volt 3-Phase

USED BridgePort Vertical 3-Axis CNC Milling Machine with Boss-8 Controls (DB)

Categories: used

Bridgeport_Variable_Speed_Milling_Machine_1_5hp_9_X_42_S_01_wguc

Bridgeport Variable Speed Milling Machine 1.5hp 9 X 42 / S

Bridgeport Variable Speed Milling Machine 1.5hp 9 X 42 / S
Bridgeport Variable Speed Milling Machine 1.5hp 9 X 42 / S
Bridgeport Variable Speed Milling Machine 1.5hp 9 X 42 / S
Bridgeport Variable Speed Milling Machine 1.5hp 9 X 42 / S
Bridgeport Variable Speed Milling Machine 1.5hp 9 X 42 / S
Bridgeport Variable Speed Milling Machine 1.5hp 9 X 42 / S
Bridgeport Variable Speed Milling Machine 1.5hp 9 X 42 / S
Bridgeport Variable Speed Milling Machine 1.5hp 9 X 42 / S
Bridgeport Variable Speed Milling Machine 1.5hp 9 X 42 / S

Bridgeport Variable Speed Milling Machine 1.5hp 9 X 42 / S
DAN’S MACHINE TOOL, INC. A PREOWNED BRIDGEPORT VARIABLE SPEED MILLING MACHINE. 9″ X 42″ TABLE. X AXIS POWER FEED. RUNS ON A 220 V – 3PH – 1.5 HP MOTOR. IN VERY GOOD CONDITION. UNDER POWER FOR INSPECTION. The item “BRIDGEPORT VARIABLE SPEED MILLING MACHINE 1.5HP 9 X 42 / S” is in sale since Wednesday, October 30, 2019. This item is in the category “Business & Industrial\CNC, Metalworking & Manufacturing\Metalworking Equipment\Machining Centers & Milling Machines”. The seller is “qjen1″ and is located in Anaheim, California. This item can’t be shipped, the buyer must pick up the item.
  • Machine Type: Milling Machine
  • Table Length: 42
  • Power Source: Electric
  • Spindle Taper: R-8
  • Function: Milling
  • Brand: Bridgeport
  • Table Width: 9
  • Control: Manual

Bridgeport Variable Speed Milling Machine 1.5hp 9 X 42 / S

Categories: bridgeport

Bridgeport_Serial_9998_Variable_Speed_Dated_BH9998_Milling_Machine_01_fmoz

Bridgeport Serial # 9998 Variable Speed (Dated -BH9998) Milling Machine

Bridgeport Serial # 9998 Variable Speed (Dated -BH9998) Milling Machine
Bridgeport Serial # 9998 Variable Speed (Dated -BH9998) Milling Machine
Bridgeport Serial # 9998 Variable Speed (Dated -BH9998) Milling Machine
Bridgeport Serial # 9998 Variable Speed (Dated -BH9998) Milling Machine
Bridgeport Serial # 9998 Variable Speed (Dated -BH9998) Milling Machine
Bridgeport Serial # 9998 Variable Speed (Dated -BH9998) Milling Machine
Bridgeport Serial # 9998 Variable Speed (Dated -BH9998) Milling Machine
Bridgeport Serial # 9998 Variable Speed (Dated -BH9998) Milling Machine
Bridgeport Serial # 9998 Variable Speed (Dated -BH9998) Milling Machine
Bridgeport Serial # 9998 Variable Speed (Dated -BH9998) Milling Machine

Bridgeport Serial # 9998 Variable Speed (Dated -BH9998) Milling Machine
I sell estate/ business liquidation of used items. The condition portrayed is my amateur opinion but I do my best to reveal any imperfections and take many photos of each item. Please use the provided photos and read the descriptions closely to investigate any concerns and contact me with any questions. The item “Bridgeport Serial # 9998 Variable Speed (Dated -BH9998) Milling Machine” is in sale since Friday, October 25, 2019. This item is in the category “Business & Industrial\CNC, Metalworking & Manufacturing\Metalworking Equipment\Machining Centers & Milling Machines”. The seller is “tomterrific26″ and is located in Northfield Falls, Vermont. This item can’t be shipped, the buyer must pick up the item.
  • Brand: Bridgeport
  • Model Year: 1948
  • Machine Type: Milling Machine
  • Max Spindle Speed (RPM): 275 – 4250
  • Voltage: 220 V
  • Function: Milling
  • Country/Region of Manufacture: United States
  • Spindle Horsepower: Less than 1 hp
  • Power Source: Electric
  • MPN: Does Not Apply
  • Control: Manual

Bridgeport Serial # 9998 Variable Speed (Dated -BH9998) Milling Machine

Categories: bridgeport

2005_HARDINGE_BRIDGEPORT_Vertical_Milling_SERIES_1_variable_Speed_2J_Head_2_hp_01_zle

2005 HARDINGE BRIDGEPORT Vertical Milling SERIES 1 variable Speed 2J Head 2 hp

2005 HARDINGE BRIDGEPORT Vertical Milling SERIES 1 variable Speed 2J Head 2 hp
2005 HARDINGE BRIDGEPORT Vertical Milling SERIES 1 variable Speed 2J Head 2 hp
2005 HARDINGE BRIDGEPORT Vertical Milling SERIES 1 variable Speed 2J Head 2 hp
2005 HARDINGE BRIDGEPORT Vertical Milling SERIES 1 variable Speed 2J Head 2 hp
2005 HARDINGE BRIDGEPORT Vertical Milling SERIES 1 variable Speed 2J Head 2 hp
2005 HARDINGE BRIDGEPORT Vertical Milling SERIES 1 variable Speed 2J Head 2 hp
2005 HARDINGE BRIDGEPORT Vertical Milling SERIES 1 variable Speed 2J Head 2 hp
2005 HARDINGE BRIDGEPORT Vertical Milling SERIES 1 variable Speed 2J Head 2 hp
2005 HARDINGE BRIDGEPORT Vertical Milling SERIES 1 variable Speed 2J Head 2 hp
2005 HARDINGE BRIDGEPORT Vertical Milling SERIES 1 variable Speed 2J Head 2 hp
2005 HARDINGE BRIDGEPORT Vertical Milling SERIES 1 variable Speed 2J Head 2 hp
2005 HARDINGE BRIDGEPORT Vertical Milling SERIES 1 variable Speed 2J Head 2 hp

2005 HARDINGE BRIDGEPORT Vertical Milling SERIES 1 variable Speed 2J Head 2 hp
2005 Hardinge Bridgeport mill 2HP Vari Speed head. 9″ X 48″ table. Machine was totally disassembled, cleaned, and reassembled. Factory original paint a few imperfections but looks great. Head was completely went through and runs nice and quite. Serviced the 1 shot Bijur lubrication system, new screws nuts on x and y axis, new way wipes. New x axis Dynamo power feed. Y axis has been reground, way taped, and fitted. Can add additional power feeds, DRO, power draw bar for additional cost. Please contact and we can discuss additional cost for adding DRO, Power Feeds, or other options. All products are as is. I shall have no other obligation or liability, direct or indirect, of any kind, including liability for special, incidental, or consequential damages. This item is for sale locally and may end at any time. The item “2005 HARDINGE BRIDGEPORT Vertical Milling SERIES 1 variable Speed 2J Head 2 hp” is in sale since Monday, April 20, 2020. This item is in the category “Business & Industrial\CNC, Metalworking & Manufacturing\Metalworking Equipment\Machining Centers & Milling Machines”. The seller is “stantecss” and is located in Chouteau, Oklahoma. This item can be shipped to United States.
  • Brand: Bridgeport
  • Model Year: 2005
  • Machine Type: Milling Machine
  • Function: Milling
  • Country/Region of Manufacture: United States
  • Table Length: 48
  • Table Width: 9
  • Spindle Taper: R-8
  • Power Source: Electric
  • Spindle Horsepower: 2 hp
  • Control: Manual

2005 HARDINGE BRIDGEPORT Vertical Milling SERIES 1 variable Speed 2J Head 2 hp

Categories: hardinge

Bridgeport_2J_Milling_Machine_Head_Variable_Speed_2HP_01_krsu

Bridgeport 2J Milling Machine Head Variable Speed 2HP

Bridgeport 2J Milling Machine Head Variable Speed 2HP
Bridgeport 2J Milling Machine Head Variable Speed 2HP
Bridgeport 2J Milling Machine Head Variable Speed 2HP
Bridgeport 2J Milling Machine Head Variable Speed 2HP

Bridgeport 2J Milling Machine Head Variable Speed 2HP
Bridgeport 2J Milling Machine Head Variable Speed 2HP.. Condition is For parts or not working. The item “Bridgeport 2J Milling Machine Head Variable Speed 2HP” is in sale since Sunday, April 12, 2020. This item is in the category “Business & Industrial\CNC, Metalworking & Manufacturing\Metalworking Equipment\Machining Centers & Milling Machines”. The seller is “wwwelding11″ and is located in Chandler, Texas. This item can be shipped to United States.
  • Brand: Bridgeport
  • Machine Type: Milling Machine
  • Model: 2J
  • Function: Milling
  • Country/Region of Manufacture: United States
  • Spindle Horsepower: 2 hp
  • Power Source: Electric

Bridgeport 2J Milling Machine Head Variable Speed 2HP

Categories: bridgeport

Nice_Bridgeport_2J_Milling_Machine_Head_Variable_Speed_2HP_01_wks

Nice Bridgeport 2J Milling Machine Head Variable Speed 2HP

Nice Bridgeport 2J Milling Machine Head Variable Speed 2HP
Nice Bridgeport 2J Milling Machine Head Variable Speed 2HP
Nice Bridgeport 2J Milling Machine Head Variable Speed 2HP
Nice Bridgeport 2J Milling Machine Head Variable Speed 2HP

Nice Bridgeport 2J Milling Machine Head Variable Speed 2HP
Nice Bridgeport 2J Milling Machine Head Variable Speed 2HP.. Condition is For parts or not working. The item “Nice Bridgeport 2J Milling Machine Head Variable Speed 2HP” is in sale since Thursday, April 2, 2020. This item is in the category “Business & Industrial\CNC, Metalworking & Manufacturing\Metalworking Equipment\Machining Centers & Milling Machines”. The seller is “wwwelding11″ and is located in Chandler, Texas. This item can be shipped to United States.
  • Brand: Bridgeport
  • Machine Type: Milling Machine
  • Model: 2J
  • Function: Milling
  • Country/Region of Manufacture: United States
  • Spindle Horsepower: 2 hp
  • Power Source: Electric

Nice Bridgeport 2J Milling Machine Head Variable Speed 2HP

Categories: nice

550W_Mini_Milling_Drilling_Machine_Variable_Speed_Gear_Drive_2500rpm_01_lnin

550W Mini Milling Drilling Machine Variable Speed Gear Drive 2500rpm

550W Mini Milling Drilling Machine Variable Speed Gear Drive 2500rpm
550W Mini Milling Drilling Machine Variable Speed Gear Drive 2500rpm
550W Mini Milling Drilling Machine Variable Speed Gear Drive 2500rpm
550W Mini Milling Drilling Machine Variable Speed Gear Drive 2500rpm
550W Mini Milling Drilling Machine Variable Speed Gear Drive 2500rpm
550W Mini Milling Drilling Machine Variable Speed Gear Drive 2500rpm
550W Mini Milling Drilling Machine Variable Speed Gear Drive 2500rpm
550W Mini Milling Drilling Machine Variable Speed Gear Drive 2500rpm
550W Mini Milling Drilling Machine Variable Speed Gear Drive 2500rpm
550W Mini Milling Drilling Machine Variable Speed Gear Drive 2500rpm
550W Mini Milling Drilling Machine Variable Speed Gear Drive 2500rpm
550W Mini Milling Drilling Machine Variable Speed Gear Drive 2500rpm

550W Mini Milling Drilling Machine Variable Speed Gear Drive 2500rpm
This mini drilling/milling machine with lathe bed can handle most materials. It has a 550watt motor with variable speed drive, The working table with t-slots can enable clamping of workpieces and metric graduated compound scales. The machine also incorporates a tilting column which allows drilling/milling of workpiece at ±90° from vertical. It is supplied with 13mm chuck accessory kit. For adjusting and setting. The lathe bed is made of high grade iron. The rigidity of lathe, the handness and accuracy of the v-slideways are obtained by raw materials, heat hardening and grinding. This machine is DC motor driven. The spindle speed is variable from 20-2500rpm. The feed speed can be adjusted according to the requirements of different workpieces. Head swivels ±90° verticaly. Adjustable gibs on table precision. Adjustable stops on table. Straightforward gear drive mechanism. Extra wide cross table. Chuck Arbor Bolt provides tightening of drilling chuck through the spindle. Rack and pinion feed for drilling operations. Safety guard with microswitch according to EU-requirements. Available in metric leadscrews. START / STOP switch incorporates emergency STOP. Table travel:10/12250/300mm. Cross slide:4″/5″ 100/130mm. Spindle travel:7 180mm. Taper of hole in spindle :MT #3 or R8. Drilling Capacity:1/2 (13mm). End Milling Capacity:5/8 (16mm). Face Milling Capacity:11/8 (30mm). Longitudinal travel: 3.94/10cm. Cross travel: 9.84/25cm. Spindle stroke: 7.87/20cm. Working table size: 18.11″x4.41″/46x11cm. Max distance spindle to table: 8.66/22cm. T-slot: 0.39/1cm. Spindle rotary angle: -45°+45°. Dimension: 14.5″x 26.5″x27/37x67x68cm. Replcement of chuck: When replacing the chuck, place a cloth or a piece of wood on the bed way at the bottom of the chuck. This is to avoid damage to the bed way caused by carelessly dropping the chuck. Loosen the 3 set screws to replace the chuck. Replcement of jaws: There are two types of jaws: Internal and external. Please note that the number of jaws fit with the number inside the chuck’s groove. Do not mix them together. When you are going to mount them, please mount them in ascending order 1-2-3, when you are going to take them oit, be sure to take them out in descending order(3-2-1) one by one. After you finish this procedure, rotate the jaws to the smallest diameter and check that the three jaws are well fitted. If you need to reassemble them again as they are not properly assembled. When you are going yo mount the work piece you need only to loosen one jaw. However, we recommend you loosen the three jaws at the same time. In this way you can protect them and will not damage the thread inside. Compound rest adjustment: Loosen the two screws. After you have obtained the angle you desire, please do not forgey to tighten them. Tailstock rest adjustment: When you are going yo change position or replace the tailstock, you need to loosen the nut. Replacement of carbon brushes: Replace the carbon brushed by removing the brush covers both on motor cover. Tool post adjustment: When you are going to asjust the tool post position, you only need to loosen the lever. After you have finished be sure to tighten. If you are going yo replace the work cutter then you need to loosen the screws with the allen wrench provided. Use the chuck to hold the workpiece firmly, and the cutter to start lath’s face cutting(edge of the cutter must be at the same height as the center). By changing the tool post angle and asjustig the compound rest, you can do internal cutting. After asjusting the angle of the compound rest, you can do bevel cutting. Use the chuck to hold the workpiece firmly. Then use the center to fix the other end. If you change the center to drilling chick you can start your drilling immediately. This is a quality mini mill Ideal for the professional engineer or model maker alike. The precision mini lathe is designed to preform various types of processing jobs. Counterface tuming, drilling, threading, and cutting jobs on materials made up of round bar and bar materials can be preformed with this machine. The machine can be used in areas such as mini precision parts processing, sample processing and modeling works. This machine is suitble to use only from 12°C-35°C53.6-95. 1 X Mini Milling Machine. 1 X Mini milling machine base. 1 X Mini milling machine column. 1 X Tool kit with wrenches. We have warehouses in the USA. E-mails are answered Monday through Saturday. Please allow up to 48 hours for a response to your message 3. The item “550W Mini Milling Drilling Machine Variable Speed Gear Drive 2500rpm” is in sale since Thursday, March 26, 2020. This item is in the category “Business & Industrial\CNC, Metalworking & Manufacturing\Metalworking Equipment\Machining Centers & Milling Machines”. The seller is “iglobalbuy2011″ and is located in Rowland Heights, California. This item can be shipped to United States.
  • Model: mini drilling/milling machine with lathe bed
  • Function: Drilling
  • Power Source: Electric
  • MPN: Does Not Apply
  • Machine Type: Mini Milling Machine
  • Brand: Unbranded
  • Motor Power: 550W
  • Max.table travel: 10″/12250/300mm
  • Max.cross slide: 4″/5″ 100/130mm
  • Max.spindle travel: 7″ 180mm
  • Spindle Speed: L:50-1100rpm H:120-2500rpm
  • Taper of hole in spindle: *:MT #3 or R8
  • Drilling Capacity: 1/2″ (13mm)
  • End Milling Capacity: 5/8″ (16mm)
  • Face Milling Capacity: 11/8″ (30mm)
  • Longitudinal travel: 3.94″/10cm
  • Cross travel: 9.84″/25cm
  • Spindle stroke: 7.87″/20cm
  • Working table size: 18.11″x4.41″/46x11cm
  • Max distance spindle to table: 8.66″/22cm
  • Spindle taper: MT3
  • T-slot: 0.39″/1cm

550W Mini Milling Drilling Machine Variable Speed Gear Drive 2500rpm

Categories: 550w

Bridgeport_Milling_Machine_Variable_Speed_Dro_1_1_2_HP_01_uwl

Bridgeport Milling Machine Variable Speed Dro 1-1/2 HP

Bridgeport Milling Machine Variable Speed Dro 1-1/2 HP
Bridgeport Milling Machine Variable Speed Dro 1-1/2 HP
Bridgeport Milling Machine Variable Speed Dro 1-1/2 HP
Bridgeport Milling Machine Variable Speed Dro 1-1/2 HP
Bridgeport Milling Machine Variable Speed Dro 1-1/2 HP
Bridgeport Milling Machine Variable Speed Dro 1-1/2 HP
Bridgeport Milling Machine Variable Speed Dro 1-1/2 HP
Bridgeport Milling Machine Variable Speed Dro 1-1/2 HP

Bridgeport Milling Machine Variable Speed Dro 1-1/2 HP
THIS IS A GOOD USED BRIDGEPORT MILLING MACHINE WITH A LOT OF NICE FEATURES. 1-1/2 HP 230/460 VOLT 3 PHASE MOTOR. VARIABLE SPEED SPINDLE, 60-4200 RPM RANGE. KWIK SWITCH COLLET SYSTEM WITH COLLET SET (75 AF STYLE). POWER FEED ON X. 9 X 42 TABLE WITH WAY COVERS. CENTRAL BIJUR LUBE SYSTEM. DISCONNECT AND MOTOR PROTECTION INCLUDED. The item “BRIDGEPORT MILLING MACHINE VARIABLE SPEED DRO 1-1/2 HP” is in sale since Thursday, October 31, 2019. This item is in the category “Business & Industrial\CNC, Metalworking & Manufacturing\Metalworking Equipment\Machining Centers & Milling Machines”. The seller is “sommatool” and is located in Waterbury, Connecticut. This item can be shipped to United States.
  • Spindle Horsepower: 1-1/2
  • Machine Type: Milling Machine
  • Table Length: 42
  • Power Source: Electric
  • X-Axis Travel Bed: 24
  • Y-Axis Travel Bed: 10
  • Z-Axis Travel Bed: 15
  • Function: Drilling
  • Brand: Bridgeport
  • Table Width: 9
  • Control: Manual

Bridgeport Milling Machine Variable Speed Dro 1-1/2 HP

Categories: bridgeport