Tag : 14mini
Secondhand 7 x 14Mini Metal Lathe Machine 550W Variable Speed 2250 RPM 3/4HP
Secondhand 7″ x 14″Mini Metal Lathe Machine 550W Variable Speed 2250 RPM 3/4HP. Wrong ordering, the outer packaging is a bit damaged, product in good condition. This 550W 7″ X 14″ Variable-speed Mini Benchtop Metal Lathe With Nylon Gears features a 3-jaw chuck, an MT3 spindle taper, an MT2 tailstock taper, a tool rest and a 3/4 HP motor, designed to perform various types of metal turning, simple to operate. Through high-frequency quenching process and precision grinding of high-quality cast iron bed. 50-2250Rpm spindle speed sub-level of two tranches spindle gear change speed control, continuously adjustable. ALUMINIUM CONSTRUCTION – The mini metal lathe bed is made of high-grade iron. Equipped with nylon gears, this lathe machine is wear-resistant, durable, more accurate rotation and professional. Mini metal lathe power of motor: 550W. The full-length splashguard provides maximum protection. INFINITELY VARIABLE SPEEDS – Spindle speed from 50-2250 Rpm. Forward and reverse in all speeds. Operate either manually or with the adjustable auto feed rate. The handedness and accuracy of the v-slideways are obtained by raw material, heat hardening and grinding. Emergency stop button included. ACCURATE 3-JAW CHUCK – Mini metal lathe chuck, 3-jaw self-centering chuck, for setting cylindrical materials steadily. Spindle is supported by precision tapered roller bearings, spindle accuracy within 0.0004(0.01mm). PROFESSIONAL COMPOUND REST – The mini metal lathe quick change tool post can achieve positions of internal cutting, face cutting, and bevel cutting by changing the tool post angle and adjusting the compound rest. The professional cross slide is designed with abrasive resistance, moving blades freely with a feed rod. WIDE APPLICATION- Driven by DC motor – this mini metal lathe cut off tool can be used in areas such as mini precision parts processing, sample processing, and modeling works. Box Opening Guide (Very Important). Take out the 4 screws (which are used to fix the machine) on the bottom of the box, please refer to the picture below. Then take off the upper lid of the box, please refer to the picture below. Carefully take out the machine from the box, otherwise damages might occur, please refer to the picture below. What size is the spindle? The spindle bore is 21 mm. What is the spindle like? The main spindle is forging blank and connected to the chuck by a flange. How do you oil the bearings? This machine’s deep-groove 6206 ball bearings are pre-lubricated. There is no need to oil them again. What are the specifications for the belt? It’s 1.5 m long & 9 mm wide. It has 96 gears. How do you adjust the tailstock? Turn the wheel up to move the tailstock horizontally. Turn the wheel down to lock the tailstock. What’s the maximum processing length? The maximum processing length is 350 mm. Distance UNLESS the closer warehouse is out of stock for the specific products that customers have ordered. Your kind consideration is highly appreciated. Special circumstances will be stated clearly in the listing. If your item has been damaged in transit or. Please check everything carefully after you receive the parcel, as any. Damages except DOA (Dead-On-Arrival) are not covered if it’s the fault of the consumer. As an emerging leader in manufacturing and exporting, we specialize in Business and Industrial Products, Sporting Goods, Pet Products, Home and Garden products for over 10 years. It is our mission to provide innovative products and competitive prices to satisfy you. The item “Secondhand 7 x 14Mini Metal Lathe Machine 550W Variable Speed 2250 RPM 3/4HP” is in sale since Monday, September 7, 2020. This item is in the category “Business & Industrial\CNC, Metalworking & Manufacturing\Metalworking Equipment\Metalworking Lathes”. The seller is “premiumautopart” and is located in Anaheim, California. This item can be shipped to United States.
- Brand: Unbranded
- Machine Type: Metal Lathe
- Treated Material: Metal
- Control: Manual
- Swing Over Bed: 7″ (180mm)
- Power Source: Electric
- Distance Between Centers: 14″ (350mm)
- MPN: XXZNJ002
- Motor Type: DC Motor
- Motor Power: 3/4HP (550W)
- Voltage: 110V/60Hz
- Spindle Bore: 0.8″ (21mm)
- Chuck Diameter: 3.94″ (100mm)
- Taper of Spindle: MT#5
- Taper of Tailstock: MT#2
- Spindle Speed: 50-2250±10% RPM
- Spindle Accuracy: 0.01mm
- Gear Material: Plastic Nylon
- Inch Thread: 12-52 T.P.I
- Metric Thread: 0.5-2.5mm
- Machine Dimension: 29.5″ x 11″ x 9.5″
- Net Weight: 80.5LB (36.54KG)
- Package Sizes: 34.25″ x 13.8″ x 16.5″
- Package Weight: 104.4LB (47.35KG)
Categories: secondhand
7 x 14Mini Metal Lathe Machine 550W Variable Speed 2250 RPM 3/4HP Upgraded
7 x 14Mini Metal Lathe Machine 550W Variable Speed 2250 RPM 3/4HP Upgraded. This 550W 7″ X 14″ Variable-speed Mini Benchtop Metal Lathe With Nylon Gears features a 3-jaw chuck, an MT3 spindle taper, an MT2 tailstock taper, a tool rest and a 3/4 HP motor, designed to perform various types of metal turning, simple to operate. Through high-frequency quenching process and precision grinding of high-quality cast iron bed. 50-2250Rpm spindle speed sub-level of two tranches spindle gear change speed control, continuously adjustable. ALUMINIUM CONSTRUCTION – The mini metal lathe bed is made of high-grade iron. Equipped with nylon gears, this lathe machine is wear-resistant, durable, more accurate rotation and professional. Mini metal lathe power of motor: 550W. The full-length splashguard provides maximum protection. INFINITELY VARIABLE SPEEDS – Spindle speed from 50-2250 Rpm. Forward and reverse in all speeds. Operate either manually or with the adjustable auto feed rate. The handedness and accuracy of the v-slideways are obtained by raw material, heat hardening and grinding. Emergency stop button included. ACCURATE 3-JAW CHUCK – Mini metal lathe chuck, 3-jaw self-centering chuck, for setting cylindrical materials steadily. Spindle is supported by precision tapered roller bearings, spindle accuracy within 0.0004(0.01mm). PROFESSIONAL COMPOUND REST – The mini metal lathe quick change tool post can achieve positions of internal cutting, face cutting, and bevel cutting by changing the tool post angle and adjusting the compound rest. The professional cross slide is designed with abrasive resistance, moving blades freely with a feed rod. WIDE APPLICATION- Driven by DC motor – this mini metal lathe cut off tool can be used in areas such as mini precision parts processing, sample processing, and modeling works. Box Opening Guide (Very Important). Take out the 4 screws (which are used to fix the machine) on the bottom of the box, please refer to the picture below. Then take off the upper lid of the box, please refer to the picture below. Carefully take out the machine from the box, otherwise damages might occur, please refer to the picture below. What size is the spindle? The spindle bore is 21 mm. What is the spindle like? The main spindle is forging blank and connected to the chuck by a flange. How do you oil the bearings? This machine’s deep-groove 6206 ball bearings are pre-lubricated. There is no need to oil them again. What are the specifications for the belt? It’s 1.5 m long & 9 mm wide. It has 96 gears. How do you adjust the tailstock? Turn the wheel up to move the tailstock horizontally. Turn the wheel down to lock the tailstock. What’s the maximum processing length? The maximum processing length is 350 mm. Distance UNLESS the closer warehouse is out of stock for the specific products that customers have ordered. Your kind consideration is highly appreciated. Special circumstances will be stated clearly in the listing. If your item has been damaged in transit or. Please check everything carefully after you receive the parcel, as any. Damages except DOA (Dead-On-Arrival) are not covered if it’s the fault of the consumer. As an emerging leader in manufacturing and exporting, we specialize in Business and Industrial Products, Sporting Goods, Pet Products, Home and Garden products for over 10 years. It is our mission to provide innovative products and competitive prices to satisfy you. The item “7 x 14Mini Metal Lathe Machine 550W Variable Speed 2250 RPM 3/4HP Upgraded” is in sale since Wednesday, December 23, 2020. This item is in the category “Business & Industrial\CNC, Metalworking & Manufacturing\Metalworking Equipment\Metalworking Lathes”. The seller is “fbiotec_fbt” and is located in Anaheim, California. This item can be shipped to United States.
- Brand: VEVOR
- Machine Type: Metal Lathe
- Treated Material: Metal
- Control: Manual
- Swing Over Bed: 7″ (180mm)
- Power Source: Electric
- Distance Between Centers: 14″ (350mm)
- MPN: XXZNJ002
- Motor Type: DC Motor
- Motor Power: 3/4HP (550W)
- Voltage: 110V/60Hz
- Spindle Bore: 0.8″ (21mm)
- Chuck Diameter: 3.94″ (100mm)
- Taper of Spindle: MT#5
- Taper of Tailstock: MT#2
- Spindle Speed: 50-2250±10% RPM
- Spindle Accuracy: 0.01mm
- Gear Material: Plastic Nylon
- Inch Thread: 12-52 T.P.I
- Metric Thread: 0.5-2.5mm
- Machine Dimension: 29.5″ x 11″ x 9.5″
- Net Weight: 80.5LB (36.54KG)
- Package Sizes: 34.25″ x 13.8″ x 16.5″
- Package Weight: 104.4LB (47.35KG)
Categories: 14mini
7 x 14Mini Metal Lathe Machine Variable Speed 2250 RPM High Precision 550W
This 550W 7″ X 14″ Variable-speed Mini Benchtop Metal Lathe With Nylon Gears features a 3-jaw chuck, an MT3 spindle taper, an MT2 tailstock taper, a tool rest and a 3/4 HP motor, designed to perform various types of metal turning, simple to operate. Through high-frequency quenching process and precision grinding of high-quality cast iron bed. 50-2250Rpm spindle speed sub-level of two tranches spindle gear change speed control, continuously adjustable. ALUMINIUM CONSTRUCTION – The mini metal lathe bed is made of high-grade iron. Equipped with nylon gears, this lathe machine is wear-resistant, durable, more accurate rotation and professional. Mini metal lathe power of motor: 550W. The full-length splashguard provides maximum protection. INFINITELY VARIABLE SPEEDS – Spindle speed from 50-2250 Rpm. Forward and reverse in all speeds. Operate either manually or with the adjustable auto feed rate. The handedness and accuracy of the v-slideways are obtained by raw material, heat hardening and grinding. Emergency stop button included. ACCURATE 3-JAW CHUCK – Mini metal lathe chuck, 3-jaw self-centering chuck, for setting cylindrical materials steadily. Spindle is supported by precision tapered roller bearings, spindle accuracy within 0.0004(0.01mm). PROFESSIONAL COMPOUND REST – The mini metal lathe quick change tool post can achieve positions of internal cutting, face cutting, and bevel cutting by changing the tool post angle and adjusting the compound rest. The professional cross slide is designed with abrasive resistance, moving blades freely with a feed rod. WIDE APPLICATION- Driven by DC motor – this mini metal lathe cut off tool can be used in areas such as mini precision parts processing, sample processing, and modeling works. Box Opening Guide (Very Important). Take out the 4 screws (which are used to fix the machine) on the bottom of the box, please refer to the picture below. Then take off the upper lid of the box, please refer to the picture below. Carefully take out the machine from the box, otherwise damages might occur, please refer to the picture below. What size is the spindle? The spindle bore is 21 mm. What is the spindle like? The main spindle is forging blank and connected to the chuck by a flange. How do you oil the bearings? This machine’s deep-groove 6206 ball bearings are pre-lubricated. There is no need to oil them again. What are the specifications for the belt? It’s 1.5 m long & 9 mm wide. It has 96 gears. How do you adjust the tailstock? Turn the wheel up to move the tailstock horizontally. Turn the wheel down to lock the tailstock. What’s the maximum processing length? The maximum processing length is 350 mm. The item “7 x 14Mini Metal Lathe Machine Variable Speed 2250 RPM High Precision 550W” is in sale since Tuesday, June 23, 2020. This item is in the category “Business & Industrial\CNC, Metalworking & Manufacturing\Metalworking Equipment\Metalworking Lathes”. The seller is “youngfit_yft” and is located in Anaheim, California. This item can be shipped to United States.
- Brand: VEVOR
- Machine Type: Metal Lathe
- Treated Material: Metal
- Control: Manual
- Swing Over Bed: 7″ (180mm)
- Power Source: Electric
- Distance Between Centers: 14″ (350mm)
- MPN: XXZNJ002
- Motor Type: DC Motor
- Motor Power: 3/4HP (550W)
- Voltage: 110V/60Hz
- Spindle Bore: 0.8″ (21mm)
- Chuck Diameter: 3.94″ (100mm)
- Taper of Spindle: MT#5
- Taper of Tailstock: MT#2
- Spindle Speed: 50-2250±10% RPM
- Spindle Accuracy: 0.01mm
- Gear Material: Plastic Nylon
- Inch Thread: 12-52 T.P.I
- Metric Thread: 0.5-2.5mm
- Machine Dimension: 29.5″ x 11″ x 9.5″
- Net Weight: 80.5LB (36.54KG)
- Package Sizes: 34.25″ x 13.8″ x 16.5″
- Package Weight: 104.4LB (47.35KG)
Categories: 14mini
Upgraded 7 x 14Mini Metal Lathe Machine 550W Variable Speed 2250 RPM 3/4HP
Upgraded 7″ x 14″Mini Metal Lathe Machine 550W Variable Speed 2250 RPM 3/4HP. This 550W 7″ X 14″ Variable-speed Mini Benchtop Metal Lathe With Nylon Gears features a 3-jaw chuck, an MT3 spindle taper, an MT2 tailstock taper, a tool rest and a 3/4 HP motor, designed to perform various types of metal turning, simple to operate. Through high-frequency quenching process and precision grinding of high-quality cast iron bed. 50-2250Rpm spindle speed sub-level of two tranches spindle gear change speed control, continuously adjustable. The mini metal lathe bed is made of high-grade iron. Equipped with nylon gears, this lathe machine is wear-resistant, durable, more accurate rotation and professional. Mini metal lathe power of motor: 550W. The full-length splashguard provides maximum protection. Spindle speed from 50-2250 Rpm. Forward and reverse in all speeds. Operate either manually or with the adjustable auto feed rate. The handedness and accuracy of the v-slideways are obtained by raw material, heat hardening and grinding. Emergency stop button included. Mini metal lathe chuck, 3-jaw self-centering chuck, for setting cylindrical materials steadily. Spindle is supported by precision tapered roller bearings, spindle accuracy within 0.0004(0.01mm). The mini metal lathe quick change tool post can achieve positions of internal cutting, face cutting, and bevel cutting by changing the tool post angle and adjusting the compound rest. The professional cross slide is designed with abrasive resistance, moving blades freely with a feed rod. WIDE APPLICATION- Driven by DC motor. This mini metal lathe cut off tool can be used in areas such as mini precision parts processing, sample processing, and modeling works. Distance Between Centers:14350mm. Swing Over Bed: 7(180mm). Swing Over Cross Slide: 110mm. Chuck Diameter: 100mm(3.94). Cross Slide Travel: 65mm(2.53). Top Slide Travel: 35mm(1.36). Spindle Accuracy: 0.01mm. Spindle Speed:50-2250±10 RPM. Gear Material: Plastic Nylon. Inch Thread: 12-52 T. Metric Thread: 0.5-2.5mm. 1 x Lathe Bed. 3 x Work Piece Holder. 11 x POM Gear. 1 x Chuck Wrench. 1 x Open-end Wrench. 1 x Acrylic Cover. 6 x Hex Wrench. 4 x Rubber Washer(with screws). Box Opening Guide (Very Important). Take out the 4 screws (which are used to fix the machine) on the bottom of the box, please refer to the picture below. Then take off the upper lid of the box, please refer to the picture below. Carefully take out the machine from the box, otherwise damages might occur, please refer to the picture below. What size is the spindle? The spindle bore is 21 mm. What is the spindle like? The main spindle is forging blank and connected to the chuck by a flange. How do you oil the bearings? This machine’s deep-groove 6206 ball bearings are pre-lubricated. There is no need to oil them again. What are the specifications for the belt? It’s 1.5 m long & 9 mm wide. It has 96 gears. How do you adjust the tailstock? Turn the wheel up to move the tailstock horizontally. Turn the wheel down to lock the tailstock. What’s the maximum processing length? The maximum processing length is 350 mm. Your kind consideration would be highly appreciated. Special circumstances will be listed clearly in the listing. If your item has been damaged in transit or. Please do check everything carefully after you received the parcel. The damage except DOA (Dead-On-Arrival) would not be covered if it’s your fault. We believe that it is our vision and mission to provide innovative products with best service and competitive price to satisfy you. Our goal is to make sure that you can find exactly what you are looking for and make it easy for you to place your orders. The item “Upgraded 7 x 14Mini Metal Lathe Machine 550W Variable Speed 2250 RPM 3/4HP” is in sale since Wednesday, June 3, 2020. This item is in the category “Business & Industrial\CNC, Metalworking & Manufacturing\Metalworking Equipment\Metalworking Lathes”. The seller is “wowfreeshipping1″ and is located in Memphis, Tennessee. This item can be shipped to United States.
- Brand: VEVOR
- Machine Type: Metal Lathe
- Treated Material: Metal
- Control: Manual
- Swing Over Bed: 180mm(7.09″)
- Power Source: Electric
- Distance Between Centers: 10 in – 20 in
- MPN: XXZNJ002
- Power of Motor: 550W DC Single Phase
- Swing Over Cross Slide: 110mm
- Chuck Diameter: 100mm(3.94″)
- Centers Distance: 350mm(13.78″)
- Spindle Bore: 20mm(1.26″)
- Spindle Taper: Mt3
- Tailstock Taper: Mt2
- Cross Slide Travel: 65mm(2.53″)
- Top Slide Travel: 35mm(1.36″)
- Spindle Speed: 0-2250 RPM
- Spindle Accuracy: 0.01mm
- Inch Thread: 12-52 T.P.I
- Metric Thread: 0.5-2.5mm
- Gear Material: Plastic Nylon
Categories: upgraded
7 x 14Mini Metal Lathe Machine 550W Variable Speed 2250 RPM DC Motor Iron Body
7″ x 14″Mini Metal Lathe Machine 550W Variable Speed 2250 RPM DC Motor Iron Body. This 550W 7″ X 14″ Variable-speed Mini Benchtop Metal Lathe With Nylon Gears features a 3-jaw chuck, an MT3 spindle taper, an MT2 tailstock taper, a tool rest and a 3/4 HP motor, designed to perform various types of metal turning, simple to operate. Through high-frequency quenching process and precision grinding of high-quality cast iron bed. 50-2250Rpm spindle speed sub-level of two tranches spindle gear change speed control, continuously adjustable. The mini metal lathe bed is made of high-grade iron. Equipped with nylon gears, this lathe machine is wear-resistant, durable, more accurate rotation and professional. Mini metal lathe power of motor: 550W. The full-length splashguard provides maximum protection. Spindle speed from 50-2250 Rpm. Forward and reverse in all speeds. Operate either manually or with the adjustable auto feed rate. The handedness and accuracy of the v-slideways are obtained by raw material, heat hardening and grinding. Emergency stop button included. Mini metal lathe chuck, 3-jaw self-centering chuck, for setting cylindrical materials steadily. Spindle is supported by precision tapered roller bearings, spindle accuracy within 0.0004(0.01mm). The mini metal lathe quick change tool post can achieve positions of internal cutting, face cutting, and bevel cutting by changing the tool post angle and adjusting the compound rest. The professional cross slide is designed with abrasive resistance, moving blades freely with a feed rod. WIDE APPLICATION- Driven by DC motor. This mini metal lathe cut off tool can be used in areas such as mini precision parts processing, sample processing, and modeling works. Distance Between Centers:14350mm. Swing Over Bed: 7(180mm). Swing Over Cross Slide: 110mm. Chuck Diameter: 100mm(3.94). Cross Slide Travel: 65mm(2.53). Top Slide Travel: 35mm(1.36). Spindle Accuracy: 0.01mm. Spindle Speed:50-2250±10 RPM. Gear Material: Plastic Nylon. Inch Thread: 12-52 T. Metric Thread: 0.5-2.5mm. 1 x Lathe Bed. 3 x Work Piece Holder. 11 x POM Gear. 1 x Chuck Wrench. 1 x Open-end Wrench. 1 x Acrylic Cover. 6 x Hex Wrench. 4 x Rubber Washer(with screws). Box Opening Guide (Very Important). Take out the 4 screws (which are used to fix the machine) on the bottom of the box, please refer to the picture below. Then take off the upper lid of the box, please refer to the picture below. Carefully take out the machine from the box, otherwise damages might occur, please refer to the picture below. Your kind consideration would be highly appreciated. Special circumstances will be listed clearly in the listing. If your item has been damaged in transit or. Please do check everything carefully after you received the parcel. The damage except DOA (Dead-On-Arrival) would not be covered if it’s your fault. We believe that it is our vision and mission to provide innovative products with best service and competitive price to satisfy you. Our goal is to make sure that you can find exactly what you are looking for and make it easy for you to place your orders. The item “7 x 14Mini Metal Lathe Machine 550W Variable Speed 2250 RPM DC Motor Iron Body” is in sale since Thursday, April 9, 2020. This item is in the category “Business & Industrial\CNC, Metalworking & Manufacturing\Metalworking Equipment\Metalworking Lathes”. The seller is “premiumautopart” and is located in Memphis, Tennessee. This item can be shipped to United States.
- Brand: Preenex
- Machine Type: Metal Lathe
- MPN: XXZNJ002
- Control: Manual
- Power Source: Electric
- Treated Material: Metal
- Swing Over Bed: 180mm(7.09″)
- Phase: Single
- Distance Between Centers: 10 in – 20 in
- Power of Motor: 550W DC
- Swing Over Cross Slide: 110mm
- Chuck Diameter: 100mm(3.94″)
- Centers Distance: 350mm(13.78″)
- Spindle Bore: 20mm
- Spindle Taper: Mt3
- Tailstock Taper: Mt2
- Cross Slide Travel: 65mm(2.53″)
- Top Slide Travel: 35mm(1.36″)
- Spindle Speed: 50-2250±10 RPM
- Spindle Accuracy: 0.01mm
- Inch Thread: 12-52 T.P.I
- Metric Thread: 0.5-2.5mm
- Volt: 110V 60HZ
- Gear Material: Plastic Nylon
Categories: 14mini
7 x 14Mini Metal Lathe Machine 550W Variable Speed with Heat-Treated Lathe Bed
7″ x 14″Mini Metal Lathe Machine 550W Variable Speed with Heat-Treated Lathe Bed. This 550W 7″ X 14″ Variable-speed Mini Benchtop Metal Lathe With Nylon Gears features a 3-jaw chuck, an MT3 spindle taper, an MT2 tailstock taper, a tool rest and a 3/4 HP motor, designed to perform various types of metal turning, simple to operate. Through high-frequency quenching process and precision grinding of high-quality cast iron bed. 50-2250Rpm spindle speed sub-level of two tranches spindle gear change speed control, continuously adjustable. The mini metal lathe bed is made of high-grade iron. Equipped with nylon gears, this lathe machine is wear-resistant, durable, more accurate rotation and professional. Mini metal lathe power of motor: 550W. The full-length splashguard provides maximum protection. Spindle speed from 50-2250 Rpm. Forward and reverse in all speeds. Operate either manually or with the adjustable auto feed rate. The handedness and accuracy of the v-slideways are obtained by raw material, heat hardening and grinding. Emergency stop button included. Mini metal lathe chuck, 3-jaw self-centering chuck, for setting cylindrical materials steadily. Spindle is supported by precision tapered roller bearings, spindle accuracy within 0.0004(0.01mm). The mini metal lathe quick change tool post can achieve positions of internal cutting, face cutting, and bevel cutting by changing the tool post angle and adjusting the compound rest. The professional cross slide is designed with abrasive resistance, moving blades freely with a feed rod. WIDE APPLICATION- Driven by DC motor. This mini metal lathe cut off tool can be used in areas such as mini precision parts processing, sample processing, and modeling works. Distance Between Centers:14350mm. Swing Over Bed: 7(180mm). Swing Over Cross Slide: 110mm. Chuck Diameter: 100mm(3.94). Cross Slide Travel: 65mm(2.53). Top Slide Travel: 35mm(1.36). Spindle Accuracy: 0.01mm. Spindle Speed:50-2250±10 RPM. Gear Material: Plastic Nylon. Inch Thread: 12-52 T. Metric Thread: 0.5-2.5mm. 1 x Lathe Bed. 3 x Work Piece Holder. 11 x POM Gear. 1 x Chuck Wrench. 1 x Open-end Wrench. 1 x Acrylic Cover. 6 x Hex Wrench. 4 x Rubber Washer(with screws). Box Opening Guide (Very Important). Take out the 4 screws (which are used to fix the machine) on the bottom of the box, please refer to the picture below. Then take off the upper lid of the box, please refer to the picture below. Carefully take out the machine from the box, otherwise damages might occur, please refer to the picture below. Your kind consideration would be highly appreciated. Special circumstances will be listed clearly in the listing. If your item has been damaged in transit or. Please do check everything carefully after you received the parcel. The damage except DOA (Dead-On-Arrival) would not be covered if it’s your fault. We believe that it is our vision and mission to provide innovative products with best service and competitive price to satisfy you. Our goal is to make sure that you can find exactly what you are looking for and make it easy for you to place your orders. The item “7 x 14Mini Metal Lathe Machine 550W Variable Speed with Heat-Treated Lathe Bed” is in sale since Wednesday, January 15, 2020. This item is in the category “Business & Industrial\CNC, Metalworking & Manufacturing\Metalworking Equipment\Metalworking Lathes”. The seller is “globalfreeshipping” and is located in Memphis, Tennessee. This item can be shipped to United States.
- Brand: Preenex
- Machine Type: Metal Lathe
- MPN: XXZNJ002
- Control: Manual
- Power Source: Electric
- Treated Material: Metal
- Swing Over Bed: 180mm(7.09″)
- Phase: Single
- Distance Between Centers: 10 in – 20 in
- Power of Motor: 550W DC
- Swing Over Cross Slide: 110mm
- Chuck Diameter: 100mm(3.94″)
- Centers Distance: 350mm(13.78″)
- Spindle Bore: 20mm
- Spindle Taper: Mt3
- Tailstock Taper: Mt2
- Cross Slide Travel: 65mm(2.53″)
- Top Slide Travel: 35mm(1.36″)
- Spindle Speed: 50-2250±10 RPM
- Spindle Accuracy: 0.01mm
- Inch Thread: 12-52 T.P.I
- Metric Thread: 0.5-2.5mm
- Volt: 110V 60HZ
- Gear Material: Plastic Nylon
Categories: 14mini
550W 7 x 14Mini Metal Lathe Machine Variable Speed 2250 RPM High Precision
550W 7″ x 14″Mini Metal Lathe Machine Variable Speed 2250 RPM High Precision. This 550W 7″ X 14″ Variable-speed Mini Benchtop Metal Lathe With Nylon Gears features a 3-jaw chuck, an MT3 spindle taper, an MT2 tailstock taper, a tool rest and a 3/4 HP motor, designed to perform various types of metal turning, simple to operate. Through high-frequency quenching process and precision grinding of high-quality cast iron bed. 50-2250Rpm spindle speed sub-level of two tranches spindle gear change speed control, continuously adjustable. The mini metal lathe bed is made of high-grade iron. Equipped with nylon gears, this lathe machine is wear-resistant, durable, more accurate rotation and professional. Mini metal lathe power of motor: 550W. The full-length splashguard provides maximum protection. Spindle speed from 50-2250 Rpm. Forward and reverse in all speeds. Operate either manually or with the adjustable auto feed rate. The handedness and accuracy of the v-slideways are obtained by raw material, heat hardening and grinding. Emergency stop button included. Mini metal lathe chuck, 3-jaw self-centering chuck, for setting cylindrical materials steadily. Spindle is supported by precision tapered roller bearings, spindle accuracy within 0.0004(0.01mm). The mini metal lathe quick change tool post can achieve positions of internal cutting, face cutting, and bevel cutting by changing the tool post angle and adjusting the compound rest. The professional cross slide is designed with abrasive resistance, moving blades freely with a feed rod. WIDE APPLICATION- Driven by DC motor. This mini metal lathe cut off tool can be used in areas such as mini precision parts processing, sample processing, and modeling works. Distance Between Centers:14350mm. Swing Over Bed: 7(180mm). Swing Over Cross Slide: 110mm. Chuck Diameter: 100mm(3.94). Cross Slide Travel: 65mm(2.53). Top Slide Travel: 35mm(1.36). Spindle Accuracy: 0.01mm. Spindle Speed:50-2250±10 RPM. Gear Material: Plastic Nylon. Inch Thread: 12-52 T. Metric Thread: 0.5-2.5mm. 1 x Lathe Bed. 3 x Work Piece Holder. 11 x POM Gear. 1 x Chuck Wrench. 1 x Open-end Wrench. 1 x Acrylic Cover. 6 x Hex Wrench. 4 x Rubber Washer(with screws). Box Opening Guide (Very Important). Take out the 4 screws (which are used to fix the machine) on the bottom of the box, please refer to the picture below. Then take off the upper lid of the box, please refer to the picture below. Carefully take out the machine from the box, otherwise damages might occur, please refer to the picture below. Your kind consideration would be highly appreciated. Special circumstances will be listed clearly in the listing. If your item has been damaged in transit or. Please do check everything carefully after you received the parcel. The damage except DOA (Dead-On-Arrival) would not be covered if it’s your fault. We believe that it is our vision and mission to provide innovative products with best service and competitive price to satisfy you. Our goal is to make sure that you can find exactly what you are looking for and make it easy for you to place your orders. The item “550W 7 x 14Mini Metal Lathe Machine Variable Speed 2250 RPM High Precision” is in sale since Wednesday, January 15, 2020. This item is in the category “Business & Industrial\CNC, Metalworking & Manufacturing\Metalworking Equipment\Metalworking Lathes”. The seller is “homegoods4sale” and is located in Memphis, Tennessee. This item can be shipped to United States.
- Brand: Preenex
- Machine Type: Metal Lathe
- MPN: XXZNJ002
- Control: Manual
- Power Source: Electric
- Treated Material: Metal
- Swing Over Bed: 180mm(7.09″)
- Phase: Single
- Distance Between Centers: 10 in – 20 in
- Power of Motor: 550W DC
- Swing Over Cross Slide: 110mm
- Chuck Diameter: 100mm(3.94″)
- Centers Distance: 350mm(13.78″)
- Spindle Bore: 20mm
- Spindle Taper: Mt3
- Tailstock Taper: Mt2
- Cross Slide Travel: 65mm(2.53″)
- Top Slide Travel: 35mm(1.36″)
- Spindle Speed: 50-2250±10 RPM
- Spindle Accuracy: 0.01mm
- Inch Thread: 12-52 T.P.I
- Metric Thread: 0.5-2.5mm
- Volt: 110V 60HZ
- Gear Material: Plastic Nylon
Categories: 550w
550W 7 x 14Mini Metal Lathe Machine Variable Speed 2250 RPM High Precision
550W 7″ x 14″Mini Metal Lathe Machine Variable Speed 0-2500 RPM High Precision. This precision mini lathe is designed to perform various types of processing & cutting jobs like counter face turning, drilling, threading, and bar cutting; this lathe can be used in mini precision parts processing, sample processing and modeling works. Made of high grade iron, the super rigid & heat-treated lathe bed has precision-ground V-slideways. Driven by powerful 550 watt DC motor. The spindle speed is infinitely variable from 50 to 2500RPM. The feed speed can be adjusted according to the requirements of different work pieces. Do NOT change the high/low gear while running. Please slow down the machine before converting high-speed mode into low-speed mode, or the gear may break down. SPECIFICATIONS: Distance Between Centers: 14″ Swing Over Bed: 7″ Swing Over Cross Slide: 110mm Spindle Taper: Mt3 Tailstock Taper: Mt2 Chuck Diameter: 100mm Spindle Bore: 20mm Cross Slide Travel: 65mm Top Slide Travel: 35mm Spindle Accuracy: 0.01mm Spindle Speed: 50-2250±10 RPM Motor Power: 550W Gear Material: Plastic Nylon Inch Thread: 12-52 T. I Metric Thread: 0.5-2.5mm Treated Material: Metal. PACKAGE LIST 1 x Lathe Bed 1 x Tray 3 x Work Piece Holder 11 x POM Gear 1 x Chuck Wrench 1 x Center 1 x Open-end Wrench 1 x Oiler 1 x Handle Wheel 1 x Acrylic Cover 6 x Hex Wrench 4 x Rubber Washer(with screws). Box Opening Guide (Very Important) Take out the 4 screws (which are used to fix the machine) on the bottom of the box, please refer to the picture below Then take off the upper lid of the box, please refer to the picture below. Your kind consideration would be highly appreciated. Special circumstances will be listed clearly in the listing. If your item has been damaged in transit or. Please do check everything carefully after you received the parcel. The damage except DOA (Dead-On-Arrival) would not be covered if it’s your fault. We believe that it is our vision and mission to provide innovative products with best service and competitive price to satisfy you. Our goal is to make sure that you can find exactly what you are looking for and make it easy for you to place your orders. The item “550W 7 x 14Mini Metal Lathe Machine Variable Speed 2250 RPM High Precision” is in sale since Friday, April 26, 2019. This item is in the category “Business & Industrial\CNC, Metalworking & Manufacturing\Metalworking Equipment\Metalworking Lathes”. The seller is “orionmotortech” and is located in Anaheim, California. This item can be shipped to United States.
- Brand: Preenex
- MPN: Does not apply
- Treated Material: Metal
- Swing Over Bed: 7″
- Distance Between Centers: 14″
- Swing Over Cross Slide: 110mm
- Spindle Taper: Mt3
- Tailstock Taper: Mt2
- Chuck Diameter: 100mm
- Spindle Bore: 20mm
- Cross Slide Travel: 65mm
- Top Slide Travel: 35mm
- Spindle Accuracy: 0.01mm
- Spindle Speed: 0-2500 RPM
- Motor Power: 550w
- Manufacturer Part Number: Does not apply
- Gear Material: Plastic Nylon
- Inch Thread: 12-52 T.P.I
- Metric Thread: 0.5-2.5mm
Categories: 550w
550W 7 x 14Mini Metal Lathe Machine Variable Speed 0-2500 RPM High Precision
The mini metal lathe bed is made of high grade iron. Nylon gears, this lathe machine is wear-resistant, durable, more accurate rotation and professional. Mini metal lathe power of motor: 550W. The full-length splashguard provides maximum protection. INFINITELY VARIABLE SPEEDS- Variable speed from 50-2500 Rpm. Forward and reverse in all speeds. Operate either manually or with the adjustable auto feed rate. The handness and accuracy of the v-slideways are obtained by raw material, heat hardening and grinding. Emergency stop buttom included. ACCURATE 3-JAW CHUCK- Mini metal lathe chuck, 3-jaw self-centering chuck, for setting cylindrical materials steadily. Spindle is supported by precision tapered roller bearings, spindle accuracy within 0.0004. PROFESSIONAL COMPOUND REST- The mini metal lathe quick change tool post can achieve positions of internal cutting, face cutting and bevel cutting by changing the tool post angle and adjusting the compound rest. Professional cross slide is designed with abrasive resistance, moving blades freely with feed rod. Driven by DC motor, this mini metal lathe cut off tool can be used in areas such as mini precision parts processing, sample processing and modeling works. Heavy & Sturdy Machine. Features a 7 inch swing over bed, 13.78 inch distance between centers and 20mm spindle bore. A thread range of 12-52 TPI. Threading dial indicator and standard and metric handwheel graduations. Variable speed from 50-2500 Rpm. The feed speed can be adjusted according to the requirements of different workpieces. 3-jaw self-centering chuck has gone tested with accuracy and repeatability to set cylindrical materials steadily. Spindle is supported by precision tapered roller bearings, spindle accuracy within 0.01mm. T-slotted compound slide with four-way tool post, 4 blades avaliable at most, easy to change quickly. Bevel cutting can be made by adjusting the angle of the compound rest with the lever. Designed with abrasive resistance, moving blades freely with feed rod. 16 TPI reversible lead screw. The v-slideways with distance between center: 350mm(13.78). Suitable for processing jobs, like counter face turning, driling, threading and cutting jobs on materials made up of round bar. All accessories are well packed. Variable-speed Metal Lathe With. The 7 x 14 Inch Precision Mini Benchtop Lathe features a 3-jaw chuck, a MT3 spindle taper, a MT2 tailstock taper, a tool rest and a 3/4 HP motor, designed to perform various types of metal turning. Through high frequency quenching process and precision grinding of high-quality cast iron bed. 50-2500Rpm spindle speed sub-level of two tranches spindle gear change speed control, continuously adjustable. A movable lamp is free for you. Power of Motor: 550W DC Single Phase. Swing Over Bed: 180mm(7.09). Swing Over Cross Slide: 110mm. Chuck Diameter: 100mm(3.94). Distance: 350mm(13.78). Spindle Bore: 32mm(1.26). Cross Slide Travel: 65mm(2.53). Top Slide Travel: 35mm(1.36). Spindle Speed: 0-2500 RPM. Spindle Accuracy: 0.01mm. Metric Thread: 0.5-2.5mm. 1 x Mini Metal Lathe. We believe that it is our vision and mission to provide innovative products with best service and competitive price to satisfy you. Our goal is to make sure that you can find exactly what you are looking for and make it easy for you to place your orders. California Warehouse: City of Industry, CA. If you need to return, please check twice to confirm the item not work and contact our customer service representative, let us know the detailed problem and send us some pictures for confirmation. Please make sure that item has NO man-made sabotage. Used items will not be accepted for return. All emails will be responded to within. Special circumstances will be listed clearly in the listing. Please do check everything carefully after you received the parcel, any the damage except DOA (Dead-On-Arrival) would not be covered if it’s your fault. Caifornia Warehouse: 18501 Arenth Ave, City of Industry, CA 91748. 300 W Airtex Blvd, Suite 200, Houston, TX 77090. 2125 Gateway Blvd, Hebron, KY 41048. 1000 High Street, Perth Amboy, NJ 08861. The item “550W 7 x 14Mini Metal Lathe Machine Variable Speed 0-2500 RPM High Precision” is in sale since Monday, April 1, 2019. This item is in the category “Business & Industrial\CNC, Metalworking & Manufacturing\Metalworking Equipment\Metalworking Lathes”. The seller is “world-etrade” and is located in Perth Amboy, New Jersey. This item can be shipped to United States, all countries in Europe, Canada, Mexico.
- Brand: VEVOR
- MPN: XUNBS009
- Power Source: Electric
- Swing Over Bed: 180mm(7.09″)
- Distance Between Centers: 10 in – 20 in
- Control: CNC
- Machine Type: Metal Lathe
- Treated Material: Metal
- Power of Motor: 550W DC Single Phase
- Variable Speed: 50-2500Rpm
- Swing Over Cross Slide: 110mm
- Chuck Diameter: 100mm(3.94″)
- Centers Distance: 350mm(13.78″)
- Spindle Bore: 32mm(1.26″)
- Spindle Taper: Mt3
- Tailstock Taper: Mt2
- Cross Slide Travel: 65mm(2.53″)
- Top Slide Travel: 35mm(1.36″)
- Spindle Speed: 0-2500 RPM
- Spindle Accuracy: 0.01mm
- Inch Thread: 12-52 T.P.I
- Metric Thread: 0.5-2.5mm
Categories: 550w