Tag : 2500rpm
550W Mini Milling Drilling Machine Variable Speed Gear Drive 2500rpm
This mini drilling/milling machine with lathe bed can handle most materials. It has a 550watt motor with variable speed drive, The working table with t-slots can enable clamping of workpieces and metric graduated compound scales. The machine also incorporates a tilting column which allows drilling/milling of workpiece at ±90° from vertical. It is supplied with 13mm chuck accessory kit. For adjusting and setting. The lathe bed is made of high grade iron. The rigidity of lathe, the handness and accuracy of the v-slideways are obtained by raw materials, heat hardening and grinding. This machine is DC motor driven. The spindle speed is variable from 20-2500rpm. The feed speed can be adjusted according to the requirements of different workpieces. Head swivels ±90° verticaly. Adjustable gibs on table precision. Adjustable stops on table. Straightforward gear drive mechanism. Extra wide cross table. Chuck Arbor Bolt provides tightening of drilling chuck through the spindle. Rack and pinion feed for drilling operations. Safety guard with microswitch according to EU-requirements. Available in metric leadscrews. START / STOP switch incorporates emergency STOP. Table travel:10/12250/300mm. Cross slide:4″/5″ 100/130mm. Spindle travel:7 180mm. Taper of hole in spindle :MT #3 or R8. Drilling Capacity:1/2 (13mm). End Milling Capacity:5/8 (16mm). Face Milling Capacity:11/8 (30mm). Longitudinal travel: 3.94/10cm. Cross travel: 9.84/25cm. Spindle stroke: 7.87/20cm. Working table size: 18.11″x4.41″/46x11cm. Max distance spindle to table: 8.66/22cm. T-slot: 0.39/1cm. Spindle rotary angle: -45°+45°. Dimension: 14.5″x 26.5″x27/37x67x68cm. Replcement of chuck: When replacing the chuck, place a cloth or a piece of wood on the bed way at the bottom of the chuck. This is to avoid damage to the bed way caused by carelessly dropping the chuck. Loosen the 3 set screws to replace the chuck. Replcement of jaws: There are two types of jaws: Internal and external. Please note that the number of jaws fit with the number inside the chuck’s groove. Do not mix them together. When you are going to mount them, please mount them in ascending order 1-2-3, when you are going to take them oit, be sure to take them out in descending order(3-2-1) one by one. After you finish this procedure, rotate the jaws to the smallest diameter and check that the three jaws are well fitted. If you need to reassemble them again as they are not properly assembled. When you are going yo mount the work piece you need only to loosen one jaw. However, we recommend you loosen the three jaws at the same time. In this way you can protect them and will not damage the thread inside. Compound rest adjustment: Loosen the two screws. After you have obtained the angle you desire, please do not forgey to tighten them. Tailstock rest adjustment: When you are going yo change position or replace the tailstock, you need to loosen the nut. Replacement of carbon brushes: Replace the carbon brushed by removing the brush covers both on motor cover. Tool post adjustment: When you are going to asjust the tool post position, you only need to loosen the lever. After you have finished be sure to tighten. If you are going yo replace the work cutter then you need to loosen the screws with the allen wrench provided. Use the chuck to hold the workpiece firmly, and the cutter to start lath’s face cutting(edge of the cutter must be at the same height as the center). By changing the tool post angle and asjustig the compound rest, you can do internal cutting. After asjusting the angle of the compound rest, you can do bevel cutting. Use the chuck to hold the workpiece firmly. Then use the center to fix the other end. If you change the center to drilling chick you can start your drilling immediately. This is a quality mini mill Ideal for the professional engineer or model maker alike. The precision mini lathe is designed to preform various types of processing jobs. Counterface tuming, drilling, threading, and cutting jobs on materials made up of round bar and bar materials can be preformed with this machine. The machine can be used in areas such as mini precision parts processing, sample processing and modeling works. This machine is suitble to use only from 12°C-35°C53.6-95. 1 X Mini Milling Machine. 1 X Mini milling machine base. 1 X Mini milling machine column. 1 X Tool kit with wrenches. We have warehouses in the USA. E-mails are answered Monday through Saturday. Please allow up to 48 hours for a response to your message 3. The item “550W Mini Milling Drilling Machine Variable Speed Gear Drive 2500rpm” is in sale since Thursday, March 26, 2020. This item is in the category “Business & Industrial\CNC, Metalworking & Manufacturing\Metalworking Equipment\Machining Centers & Milling Machines”. The seller is “iglobalbuy2011″ and is located in Rowland Heights, California. This item can be shipped to United States.
- Model: mini drilling/milling machine with lathe bed
- Function: Drilling
- Power Source: Electric
- MPN: Does Not Apply
- Machine Type: Mini Milling Machine
- Brand: Unbranded
- Motor Power: 550W
- Max.table travel: 10″/12250/300mm
- Max.cross slide: 4″/5″ 100/130mm
- Max.spindle travel: 7″ 180mm
- Spindle Speed: L:50-1100rpm H:120-2500rpm
- Taper of hole in spindle: *:MT #3 or R8
- Drilling Capacity: 1/2″ (13mm)
- End Milling Capacity: 5/8″ (16mm)
- Face Milling Capacity: 11/8″ (30mm)
- Longitudinal travel: 3.94″/10cm
- Cross travel: 9.84″/25cm
- Spindle stroke: 7.87″/20cm
- Working table size: 18.11″x4.41″/46x11cm
- Max distance spindle to table: 8.66″/22cm
- Spindle taper: MT3
- T-slot: 0.39″/1cm
Categories: 550w
110V 7 x 14 550W Variable-Speed Mini Metal Lathe Variable 0.75HP Speed 2500RPM
SPINDLE MOTOR AND INVERTER VFD. Healthy and beauty machines. Steam generator for bath SPA. Electrical & Test Equipment. Listing for Winit and 4PX. Small Value Product in U. You may also like. 2 AXIS DIGITAL READOUT DRO FOR MILLING LATHE MACHINE LINEAR SCALES ENCODER. 110V 8”x16” 750W Variable-Speed Mini Metal Lathe Bench Top Digital Top Quality. MILL MILLING LATHE MACHINE LINEAR SCALE ENCOLDE AND 3 AXIS DIGITAL READOUT DRO. 3 Axis CNC Router 2417 Mini Engraving Machine Milling Engraver PCB Metal DIY US. SINO 3 AXIS DIGITAL READOUT DRO LINEAR GLASS SCALE ENCODER FOR MILL MILLING. 3 Axis CNC 6040 Engraving Drilling Milling Machine 3D Cutter Engraver USB Router. 110V 7″ x 14″ 550W Variable-Speed Mini Metal Lathe Variable 0.75HP Speed 2500RPM. This precision mini lathe is designed to perform various types of metal turning. Turning, drilling, threading, and cutting jobs on various materials. This machine can be used in areas such as mini precision parts processing, sample processing and modeling works. The precision mini lathe is perfect for the hobbyist or modeler who is looking to add finite detail to their construction project. Open the switch to start the operation, do not need to worry about not touch the boot to bring security risks, emergency shutdown, just take the red cover to shut down, very safe. Telescopic sets with scale, you can intuitively see the length of the telescopic handle scale, precise scaling can be digitally standardized, but also lateral movement. By adjusting the speed switch can control the spindle speed 50-2250±10%RPM. Machine is equipped with strong nylon gears, power strong, wear-resistant, durable, more accurate rotation. In particular, the thread is more accurate. Machine using four-way rotating turret, which can be four common turning. Large slide mobile handle, small slide mobile handle, bed saddle mobile handle, tailstock mobile handle, tailstock telescopic cover, tailstock side of the moving position of the scale, the operation more accurate, more professional performance. Variable Speed Gear: Plastic Nylon. Power Of Motor:0.75 HP 550W 110V. Spindle accuracy: 004(0.01mm). Swing Over Bed:7(180mm). Distance between centers:14(350mm). Over Cross Slide:110mm. Chuck diameter:3.93(100mm). Machine bed width :3.15(80 mm). Taper Of Spingdle Bore:MT3. Hole Through Spindle: 0.79 (20mm). Range of spindle speeds:50-2250±10% RPM. Imperial threads: 5-2.5 12-52 T. I Range of Imperial Threads. Metric threads:0.5-2.5mm. Top slide travel: 1.38 (35mm). Cross slide travel: 2.56 (65mm). Taper of tailstock sleeve:MT2. This machine DC motor drived. The spindle speed readout is infinitely variable from 50-2250±10% RPM. Spindle speed adjusted by MCU. Rotary direction”F”or”R”changed by key. The feed can be adjusted according to the requirement of different workpieces. This can be used as mini precision parts processing, sample processing, and modeling works. 550w strong power, 350mm processing distance, DIY processing of metal, wood. With high precision, can turn out the standard qualified works. Bed saddle tail scale precision, feed more precise fine-tuning, telescopic sleeve scale practical. Multi-function and multi-usage, can be turned within the foreign aid, turning thread, turning taper and so on. Automatic tool, Infinitely variable, professional tool post. MS2 # Fix The Top. 4 × Shockproof Foot Cushion. Our company is an emerging professional Cross-Border Electronic company. So far we have finished the assets re-organization and obtained wholesale financing. We guarantee every product is of high quality and durable utility compared to other factories becayse we choose the best-buys goods. We are really appreciated if you would like to give us your valuable positive comment(s) after you receive our products, which is a huge encouragement for us to make our products and service better and better. Hope you will love our items. Any questions will be answered promptly, so please feel free to let me know your concern. At present, our company has warehouses in America and NO tariffs. If you are a U. Transport time will range from 2 to 4 workdays according to your location. Note: American regional AK, HI, PR, are remote areas. These places will be charged. We offer 1-year guarantee. Please do check everything carefully when receiving the package. Failure to do so might result in damage to your own rights and interests. The item “110V 7 x 14 550W Variable-Speed Mini Metal Lathe Variable 0.75HP Speed 2500RPM” is in sale since Thursday, January 30, 2020. This item is in the category “Business & Industrial\CNC, Metalworking & Manufacturing\Woodworking Equipment\Lathes”. The seller is “solar.jean” and is located in Los Angeles. This item can be shipped to United States.
- Brand: TaiShi
- Chuck diameter: 3.93″(100mm)
- Country/Region of Manufacture: China
- Cross slide travel: 2.56″ (65mm)
- Distance between centers: 14″(350mm)
- Hole Through Spindle: 0.79″ (20mm)
- Machine bed width: 3.15″(80 mm)
- Max. Swing D ia.Over Bed: 180mm
- Max. Swing D ia.Over Cross Slide: 110mm
- Metric threads: 0.5-2.5mm
- MPN: SJN2019102810
- Power Of Motor: 0.75 HP 550W 110V
- Power Source: Electric
- Range of spindle speeds: 50-2250±10% RPM
- Spindle accuracy: 004″( 0.01mm )
- Swing Over Bed: 7″(180mm)
- Taper Of Spingdle Bore: MT3
- Taper of tailstock sleeve: MT2
- Top slide travel: 1.38″ (35mm)
- Variable Speed Gear: Plastic Nylon
Categories: 110v
7×14 550W Mini Precision Metal Lathe 2500RPM Variable Speed Digital Read out
7″x14″ 550W Mini Precision Metal Lathe 2500RPM Variable Speed Digital Read out. This precision mini lathe is designed to perform various types of processing jobs. Turning, drilling, threading, and cutting jobs on materials made up of round bar and bar. Materials can be performed with this machine. This machine can be used in areas such as mini. Precision parts processing, sample processing and modeling works. This machine DC motor drived. The spindle speed readout is infinitely variable from 100 to 2500RPM. Spindle speed adjusted by MCU. Rotary direction”F”or”R”changed by key. The feed can be adjusted according to the requirement of different workpieces. This can be used as mini precision parts processing, sample processing, and modeling works. 14″ Distance Between Centers 7″ Swing Over Bed 110mm Swing Over Cross Slide MT3 Spindle Taper MT2 Tailstock Taper 3 Jaw 4″ Chuck Diameter 20mm(0.79″) Spindle Bore 65mm (2.56)Cross Slide Travel. 35mm (1.38)Top Slide Travel 0.01mm Spindle Accuracy Spindle Speed: 0-2500 RPM Infinity Variable 550w Motor Single Phase. Range of metric threads 0.5-2.5mm. Range of imperial threads 12-52TPI. Please ensure that you enter a Commercial Business Address. You will be invoiced for the additional amount required. We reserve the right to cancel an order or terminate a sale for any reason. Please make sure you order the correct item as orders cannot be altered after the order is paid for. All items are 100% brand-new, and not refurbished in any way, unless the listing specifically states otherwise. Boxes may be opened for the purpose of testing, inspecting, photographing, adding additional padding/packaging/instruction supplements, or ensuring the completeness of the item. Customers must return all items in their original condition which include the original Packaging accompanied with packing slip, Documentation & Manuals and Accessories, etc. We welcome and treasure all of our customers. We are providing the following warning for our products. WARNING: Proposition 65 requires California to publish a list of chemicals known to cause cancer, birth defects or other reproductive harm. About California Proposition 65. Proposition 65, officially the Safe Drinking Water and Toxic Enforcement Act of 1986, is a law that requires warnings be provided to California consumers when they might be exposed to chemicals identified by California as causing cancer or reproductive toxicity. The warnings are intended to help california consumers make informed decisions about their exposures to these chemicals from the products they use. The California Office of Environmental Health Hazard Assessment (OEHHA) administers the Proposition 65 program and publishes the listed chemicals, which includes more that 850 chemicals. In August 2016, OEHHA adopted new regulations, effective on August 30, 2018, which change the information required in Proposition 65 warnings. WARNING: This product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm. California requires the following notice. WARNING: Everything contains agents known to the State of California to cause cancer and birth defects or other reproductive harm. WARNING: Some dust created by power sanding, sawing, grinding, drilling, and other construction activities contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm. Some examples of these chemicals are. Lead from lead-based paints. Crystalline silica from bricks and cement and other masonry products, and. Arsenic and chromium from chemically treated lumber. Your risk from exposure to these chemicals varies, depending on how often you do this type of work. To reduce your exposure, work in a well-ventilated area and with approved safety equipment, such as dust masks that are specially designed to filter out microscopic particles. California requires the following separate notice. WARNING: Consuming foods or beverages that have been kept or served in leaded crystal products will expose you to lead, a chemical known to the State of California to cause birth defects or other reproductive harm. This warning does not apply to Baccarat decanters, flacons, stoppered pitchers, and mustard and jam pots. California requires the following separate notice for ceramic tableware on the packaging. WARNING: Use of this tableware will expose you to lead, a chemical known to the State of California to cause birth defects or other reproductive harm. Jewelry and Tiffany Style Lamps. WARNING: This product contains lead, a chemical known to the State of California to cause cancer and birth defects or other reproductive harm. WARNING: The wires of this product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm. WARNING: Motor vehicles contain fuel, oils and fluids, battery posts, terminals and related accessories which contain lead and lead compounds and other chemicals known to the State of California to cause cancer, birth defects and other reproductive harm. These chemicals are found in vehicles, vehicle parts and accessories, both new and as replacements. When being serviced, these vehicles generate used oil, waste fluids, grease, fumes and particulates, all known to the State of California to cause cancer, birth defects, and reproductive harm. California requires the following notice on beauty and skin care products that contain progesterone. WARNING: This product contains progesterone, a chemical known to the State of California to cause cancer. Consult with your physician before using this product. Fresh Fruits, Nuts, and Vegetables. WARNING: This product may contain a chemical known to the State of California to cause cancer, or birth defects or other reproductive harm. Alcoholic Beverages, Including, Without Limitation, Beer, Malt, Beverages, Wine, and Distilled Spirits. WARNING: Drinking Distilled Spirits, Beer, Coolers, Wine and Other Alcoholic Beverages May Increase Cancer Risk, and, During Pregnancy, Can Cause Birth Defects. Canned and Bottled Foods and Beverages. WARNING: Many food and beverage cans have linings containing bisphenol A (BPA), a chemical known to the State of California to cause harm to the female reproductive system. Jar lids and bottle caps may also contain BPA. You can be exposed to BPA when you consume foods or beverages packaged in these containers. Coffee and Some Roasted Nuts, Baked Goods and Snack Foods. WARNING: Chemicals known to the State of California to cause cancer and birth defects or other reproductive harm, including acrylamide, are present in coffee and some roasted nuts, baked goods and snack foods such as chips. Acrylamide is not added to these products, but results naturally from the roasting, baking or cooking process. The FDA has not advised people to stop consuming foods that are fried, roasted, or baked. Additional Information about Proposition 65. Listing and template services provided by inkFrog. The item “7×14 550W Mini Precision Metal Lathe 2500RPM Variable Speed Digital Read out” is in sale since Friday, August 8, 2014. This item is in the category “Business & Industrial\CNC, Metalworking & Manufacturing\Metalworking Equipment\Metalworking Lathes”. The seller is “econoestore” and is located in Rowland Heights, California. This item can be shipped to United States.
- Brand: Unbranded/Generic
- Model: 618A
- MPN: DOES NOT APPLY
- UPC: Does not Apply
Categories: 7x14
Mini Milling Drilling Machine Variable Speed Gear Drive 550W 2500rpm Motor MT3
This mini drilling/milling machine with lathe bed can handle most materials. It has a 550watt motor with variable speed drive, The working table with t-slots can enable clamping of workpieces and metric graduated compound scales. The machine also incorporates a tilting column which allows drilling/milling of workpiece at ±90° from vertical. It is supplied with 13mm chuck accessory kit. For adjusting and setting. The lathe bed is made of high grade iron. The rigidity of lathe, the handness and accuracy of the v-slideways are obtained by raw materials, heat hardening and grinding. This machine is DC motor driven. The spindle speed is variable from 20-2500rpm. The feed speed can be adjusted according to the requirements of different workpieces. Head swivels ±90° verticaly. Adjustable gibs on table precision. Adjustable stops on table. Straightforward gear drive mechanism. Extra wide cross table. Chuck Arbor Bolt provides tightening of drilling chuck through the spindle. Rack and pinion feed for drilling operations. Safety guard with microswitch according to EU-requirements. Available in metric leadscrews. START / STOP switch incorporates emergency STOP. Table travel:10/12250/300mm. Cross slide:4″/5″ 100/130mm. Spindle travel:7 180mm. Taper of hole in spindle :MT #3 or R8. Drilling Capacity:1/2 (13mm). End Milling Capacity:5/8 (16mm). Face Milling Capacity:11/8 (30mm). Longitudinal travel: 3.94/10cm. Cross travel: 9.84/25cm. Spindle stroke: 7.87/20cm. Working table size: 18.11″x4.41″/46x11cm. Max distance spindle to table: 8.66/22cm. T-slot: 0.39/1cm. Spindle rotary angle: -45°+45°. Dimension: 14.5″x 26.5″x27/37x67x68cm. Replcement of chuck: When replacing the chuck, place a cloth or a piece of wood on the bed way at the bottom of the chuck. This is to avoid damage to the bed way caused by carelessly dropping the chuck. Loosen the 3 set screws to replace the chuck. Replcement of jaws: There are two types of jaws: Internal and external. Please note that the number of jaws fit with the number inside the chuck’s groove. Do not mix them together. When you are going to mount them, please mount them in ascending order 1-2-3, when you are going to take them oit, be sure to take them out in descending order(3-2-1) one by one. After you finish this procedure, rotate the jaws to the smallest diameter and check that the three jaws are well fitted. If you need to reassemble them again as they are not properly assembled. When you are going yo mount the work piece you need only to loosen one jaw. However, we recommend you loosen the three jaws at the same time. In this way you can protect them and will not damage the thread inside. Compound rest adjustment: Loosen the two screws. After you have obtained the angle you desire, please do not forgey to tighten them. Tailstock rest adjustment: When you are going yo change position or replace the tailstock, you need to loosen the nut. Replacement of carbon brushes: Replace the carbon brushed by removing the brush covers both on motor cover. Tool post adjustment: When you are going to asjust the tool post position, you only need to loosen the lever. After you have finished be sure to tighten. If you are going yo replace the work cutter then you need to loosen the screws with the allen wrench provided. Use the chuck to hold the workpiece firmly, and the cutter to start lath’s face cutting(edge of the cutter must be at the same height as the center). By changing the tool post angle and asjustig the compound rest, you can do internal cutting. After asjusting the angle of the compound rest, you can do bevel cutting. Use the chuck to hold the workpiece firmly. Then use the center to fix the other end. If you change the center to drilling chick you can start your drilling immediately. This is a quality mini mill Ideal for the professional engineer or model maker alike. The precision mini lathe is designed to preform various types of processing jobs. Counterface tuming, drilling, threading, and cutting jobs on materials made up of round bar and bar materials can be preformed with this machine. The machine can be used in areas such as mini precision parts processing, sample processing and modeling works. This machine is suitble to use only from 12°C-35°C53.6-95. 1 X Mini Milling Machine. 1 X Mini milling machine base. 1 X Mini milling machine column. 1 X Tool kit with wrenches. We have warehouses in the USA. E-mails are answered Monday through Saturday. Please allow up to 48 hours for a response to your message 3. The item “Mini Milling Drilling Machine Variable Speed Gear Drive 550W 2500rpm Motor MT3″ is in sale since Wednesday, July 18, 2018. This item is in the category “Business & Industrial\CNC, Metalworking & Manufacturing\Metalworking Equipment\Machining Centers & Milling Machines”. The seller is “iddmart2011″ and is located in Rowland Heights, California. This item can be shipped to United States.
- Model: mini drilling/milling machine with lathe bed
- Function: Drilling
- Power Source: Electric
- MPN: Does Not Apply
- Machine Type: Mini Milling Machine
- Brand: Unbranded
- Motor Power: 550W
- Max.table travel: 10″/12250/300mm
- Max.cross slide: 4″/5″ 100/130mm
- Max.spindle travel: 7″ 180mm
- Spindle Speed: L:50-1100rpm H:120-2500rpm
- Taper of hole in spindle: *:MT #3 or R8
- Drilling Capacity: 1/2″ (13mm)
- End Milling Capacity: 5/8″ (16mm)
- Face Milling Capacity: 11/8″ (30mm)
- Longitudinal travel: 3.94″/10cm
- Cross travel: 9.84″/25cm
- Spindle stroke: 7.87″/20cm
- Working table size: 18.11″x4.41″/46x11cm
- Max distance spindle to table: 8.66″/22cm
- Spindle taper: MT3
- T-slot: 0.39″/1cm
Categories: mini