Tag : table
Dremel Model 219 Table Top Motor Speed Control Motor with Display
Dremel Model 219 Table Top Motor Speed Control Motor Speed Control with Display. Condition is “For parts or not working”. This is a real cool vintage item it does power up the red button lights up. But it is not tested I do not know if it works properly. So it might be a project you might need to work on it to get it to work a hundred percent. This item is in the category “Home & Garden\Tools & Workshop Equipment\Power Tools\Rotary Tools”. The seller is “na1990″ and is located in this country: US. This item can be shipped to United States, China, Mexico, Germany, Japan.
- Battery Included: No
- Number of Pieces: 1
- Power Source: Corded Electric
- Color: gray and silver
- MPN: 219
- Brand: Dremel
- Type: Speed Control
- Number of Batteries: 0
- Manufacturer Warranty: None
- Voltage: 120 V
- Model: Table Top Speed Control
- Features: Variable Speed
- Country/Region of Manufacture: United States
Categories: dremel
Dremel Model 219 Table Top Motor Speed Control Motor with Display
Dremel Model 219 Table Top Motor Speed Control Motor Speed Control with Display. Condition is “For parts or not working”. This is a real cool vintage item it does power up the red button lights up. But it is not tested I do not know if it works properly. So it might be a project you might need to work on it to get it to work a hundred percent. This item is in the category “Home & Garden\Tools & Workshop Equipment\Power Tools\Rotary Tools”. The seller is “na1990″ and is located in this country: US. This item can be shipped to United States, Canada, United Kingdom, Denmark, Romania, Slovakia, Bulgaria, Czech Republic, Finland, Hungary, Latvia, Lithuania, Malta, Estonia, Australia, Greece, Portugal, Cyprus, Slovenia, Japan, China, Sweden, Korea, South, Indonesia, Taiwan, South Africa, Thailand, Belgium, France, Hong Kong, Ireland, Netherlands, Poland, Spain, Italy, Germany, Austria, Bahamas, Israel, Mexico, New Zealand, Philippines, Singapore, Switzerland, Norway, Saudi Arabia, United Arab Emirates, Qatar, Kuwait, Bahrain, Croatia, Republic of, Malaysia, Antigua and Barbuda, Aruba, Belize, Dominica, Grenada, Saint Kitts-Nevis, Saint Lucia, Montserrat, Turks and Caicos Islands, Barbados, Bangladesh, Bermuda, Brunei Darussalam, Bolivia, Egypt, French Guiana, Guernsey, Gibraltar, Guadeloupe, Iceland, Jersey, Jordan, Cambodia, Cayman Islands, Liechtenstein, Sri Lanka, Luxembourg, Monaco, Macau, Martinique, Maldives, Nicaragua, Oman, Pakistan, Paraguay, Reunion, Uruguay.
- Battery Included: No
- Number of Pieces: 1
- Power Source: Corded Electric
- Color: gray and silver
- MPN: 219
- Brand: Dremel
- Type: Speed Control
- Number of Batteries: 0
- Manufacturer Warranty: None
- Voltage: 120 V
- Model: Table Top Speed Control
- Features: Variable Speed
- Country/Region of Manufacture: United States
Categories: dremel
Clausing 15 Variable Speed Drill on Production Table
Clausing 15 Variable Speed Drill. I leave the worn out and repainted machinery for the other guys. The item “Clausing 15 Variable Speed Drill on Production Table” is in sale since Tuesday, August 17, 2021. This item is in the category “Business & Industrial\CNC, Metalworking & Manufacturing\Metalworking Equipment\Drilling & Tapping Machines\Floor & Bench Drill Presses”. The seller is “mark10312″ and is located in Farmingdale, New Jersey. This item can be shipped to United States.
- Model: 1685
- Machine Type: Drill Press Stand
- Stand Type: Bench
- Model Year: Unknown
- Power Source: Electric
- Number of Speed: Variable
- Spindle Taper: 2MT
- Brand: Clausing
- Control: Manual
- Voltage: 220v 3ph
Categories: clausing
Allen Column Drill Press all Cast Iron Table Variable Speed Sensitive
Allen column-type Drill Press. 220 volt 3 phase (motor can be swapped to 440/460 volt). Gutters around bench top perimeter for coolant or oil drainage. 15 throat depth down by the table. 60 to 2400 rpm. Jacobs #6A chuck 1/2 capacity. 2 Morse taper in quill. 25 x 33 3/4 machined surface work area. Counterweight return on quill. Approx 12 down travel on column. Adjust speed only when spindle is rotating. In my view, this qualifies as a “sensitive” drill press, being that light precision work can be done on heavier workpieces. FOB Dry Prong, LA (Venue for all matters in this sale). 48 hrs needed to have out and ready to load. The item “Allen Column Drill Press all Cast Iron Table Variable Speed Sensitive” is in sale since Saturday, October 31, 2020. This item is in the category “Business & Industrial\CNC, Metalworking & Manufacturing\Metalworking Equipment\Drilling & Tapping Machines\Floor & Bench Drill Presses”. The seller is “mill-equipment” and is located in Bentley, Louisiana. This item can be shipped to United States.
- Spindle Speed: 2400
- Country/Region of Manufacture: United States
- Machine Type: Drill Press Stand
- Drill Travel: 6.00 in
- Stand Type: Column
- Power Source: Electric
- Number of Speed: Variable
- Spindle Taper: 2MT
- MPN: Does Not Apply
- Swing: 30.00 in
- Power: 2.00 hp
- Brand: Allen
- Chuck Size: .750
- Drive Type: Belt
- Control: Manual
- Voltage: 220
Categories: allen
Bridgeport Mill, 42 Table, Servo Variable Speed-X Axis Powerfeed Mfg in USA
Quality & Integrity Since 1925. Bridgeport Mill, 42 Table. Servo Variable Speed-X Axis Powerfeed. Machine is tested and is fully operational. This machine was used for one operation. In our flow machine shop and has been in storage for about 10 years. We went through entire machine. C leaned and lubricated all zerk fittings and lead screw. And polished dials and handles. Sandblasted light fixtures and repainted. Cleaned and painted lower base. Machine is wired for 220 3Ø. WE WILL FORKLIFT ONTO YOUR TRUCK OR TRAILER AT NO ADDITIONAL CHARGE. WE ALSO HAVE SINGLE SPINDLE DRILL PRESSES, BURGMASTER TURRET DRILLS. ENG LATHES, MILLS, 52 SHEER, 2ND OPERATION LATHE , TOOLING AND MUCH MORE. And we can answer any questions you have about this item. The items are as you see it in the picture. Local pick-up is available. Lynde-Ordway is a California corporation dedicated to providing quality products at very competitive prices. We have been leading the way in our areas of expertise since 1925 thanks to “You” our loyal customers. We strive to offer the best total value: Quality Products, Very Competitive Prices, Experienced Account Managers and Factory Trained Technicians. Lynde-Ordway can also custom modify any machine to meet the needs of even the most complex application. Lynde-Ordway only ships to the 48 Contiguous United States. For a general message. Please check the item page for specific return policies. Huntington Beach, CA 92649. The item “Bridgeport Mill, 42 Table, Servo Variable Speed-X Axis Powerfeed Mfg in USA” is in sale since Friday, January 8, 2021. This item is in the category “Business & Industrial\CNC, Metalworking & Manufacturing\Metalworking Equipment\Machining Centers & Milling Machines”. The seller is “lynde-ordway” and is located in Huntington Beach, California. This item can’t be shipped, the buyer must pick up the item.
- Country/Region of Manufacture: United States
- Machine Type: Milling Machine
- Table Length: 42″
- Power Source: Electric
- MPN: Does Not Apply
- Function: Milling
- Brand: Bridgeport
- Table Width: 9″
- Control: Semi-Automatic
- Voltage: 220 V
Categories: bridgeport
Clausing 1644 VFD Floor Drill Press HIGH SPEED 3ø 220v tilt table 10×14 5400RPM
Clausing model 1644 Drill Press. Includes new OSHA approved spindle guard (not installed). A TECO L510 VFD (newest 2020 model revision with vectoring) is wired up with a quick disconnect harness and included, however i did not mount the VFD to the press (last part of the project). The VFD is a 3ph model, if you would require a single phase VFD i can keep this one. For my disc sander and discount the price so you can get one that suits you. Spindle and motor are in excellent used condition. The item “Clausing 1644 VFD Floor Drill Press HIGH SPEED 3ø 220v tilt table 10×14 5400RPM” is in sale since Saturday, July 24, 2021. This item is in the category “Business & Industrial\CNC, Metalworking & Manufacturing\Metalworking Equipment\Drilling & Tapping Machines\Floor & Bench Drill Presses”. The seller is “castleguns” and is located in Minden, Nevada. This item can be shipped to North, South, or Latin America, all countries in Europe, all countries in continental Asia.
- Spindle Speed: 5400 RPM
- Model: 1644
- Modified Item: Yes
- Country/Region of Manufacture: United States
- Custom Bundle: Yes
- Machine Type: Drill & Tap Press
- Drill Travel: 6.00 in
- Stand Type: Floor
- California Prop 65 Warning: This scary drill press may kill you, buy at your own risk! BOO!
- Model Year: 1961
- Power Source: Electric
- Number of Speed: Variable
- MPN: 1644
- Spindle Taper: 2MT
- Modification Description: Motor has been direct wired to QD cable. VFD bypassing the factory start stop switches
- Swing: 15.00 in
- Power: 1.00 hp
- Brand: Clausing
- Chuck Size: 0.50 in
- Amperage: 4.2 amps
- Drive Type: Belt
- Bundle Description: Includes OSHA spindle guard, NEW TECO VFD
- Control: Manual
- Voltage: 220 V
Categories: clausing
Clausing 1644 VFD Floor Drill Press HIGH SPEED 3ø 220v tilt table 10×14 5400RPM
Clausing model 1644 Drill Press. Includes new OSHA approved spindle guard (not installed). A TECO L510 VFD (newest 2020 model revision with vectoring) is wired up with a quick disconnect harness and included, however i did not mount the VFD to the press (last part of the project). The VFD is a 3ph model, if you would require a single phase VFD i can keep this one. For my disc sander and discount the price so you can get one that suits you. Spindle and motor are in excellent used condition. The item “Clausing 1644 VFD Floor Drill Press HIGH SPEED 3ø 220v tilt table 10×14 5400RPM” is in sale since Wednesday, June 9, 2021. This item is in the category “Business & Industrial\CNC, Metalworking & Manufacturing\Metalworking Equipment\Drilling & Tapping Machines\Floor & Bench Drill Presses”. The seller is “castleguns” and is located in Minden, Nevada. This item can be shipped to North, South, or Latin America, all countries in Europe, all countries in continental Asia.
- Spindle Speed: 5400 RPM
- Model: 1644
- Modified Item: Yes
- Country/Region of Manufacture: United States
- Custom Bundle: Yes
- Machine Type: Vintage Drill Press
- Drill Travel: 6.00 in
- Stand Type: Floor
- California Prop 65 Warning: This scary drill press may kill you, buy at your own risk! BOO!
- Model Year: 1961
- Power Source: Electric
- Number of Speed: Variable
- MPN: 1644
- Spindle Taper: 2MT
- Modification Description: Motor has been direct wired to VFD bypassing the factory start stop switches
- Swing: 15.00 in
- Power: 1.00 hp
- Brand: Clausing
- Chuck Size: 0.50 in
- Amperage: 4.2 amps
- Drive Type: Belt
- Bundle Description: Includes OSHA spindle guard, NEW TECO VFD
- Control: Manual
- Voltage: 220 V
Categories: clausing
Clausing 2286 Drill Press on Cast Iron Table 20 Variable Speed
Clausing 2286 Drill Press. 220 volt 3 phase. 1.5 HP motor. 34 floor to bench top. Gutters around bench top perimeter for coolant or oil drainage. 9″ throat depth down by the table, 10″ higher up. 150 to 2000 rpm. Jacobs #18 chuck 1/8 to 3/4 capacity. 3 Morse taper in quill. 16 3/4 x 16 3/4 machined surface work area. Spring return on quill. Approx 12 down travel on column. Adjust speed only when spindle is rotating. FOB Dry Prong, LA (Venue for all matters in this sale). 48 hrs needed to have out and ready to load. The item “Clausing 2286 Drill Press on Cast Iron Table 20 Variable Speed” is in sale since Friday, October 30, 2020. This item is in the category “Business & Industrial\CNC, Metalworking & Manufacturing\Metalworking Equipment\Drilling & Tapping Machines\Floor & Bench Drill Presses”. The seller is “mill-equipment” and is located in Bentley, Louisiana. This item can be shipped to United States.
- Spindle Speed: 2000
- Model: 2286
- Country/Region of Manufacture: United States
- Machine Type: Drill Press Stand
- Drill Travel: 6.00 in
- Stand Type: Bench
- Power Source: Electric
- Number of Speed: Variable
- Spindle Taper: 3MT
- MPN: Does Not Apply
- Swing: 20.00 in
- Power: 1.50 hp
- Brand: Clausing
- Chuck Size: .750
- Drive Type: Belt
- Control: Manual
- Voltage: 220
Categories: clausing
Industrial Drill Press Floor Adjustable Table with Laser Guide Variable 16-Speed
Stark Variable Speed Floor Standing Drill Press boasts a full four inches of stroke capacity, allowing users to drill through thick materials. Adjust the variable speed anywhere from 260 to 3,600 RPM with the simple turn of a lever, or from 1000 to 3300 RPM with a quick belt adjustment. 16 Speed Operation – Drill Press with adjustable speed of 16 various stop ranging from 220 to 3600 RPM. Build-In Precision Laser – The laser light specifies the exact spot that the bit will travel through for maximum precision during drilling. Heavy Duty Base – Sturdy base prevent walking and wobbling during operation with bolt holes to mount the drill press to a bench top of your choice. Depth Adjustment Gauge – Set the depth adjustment lever to limit your spindle travel for accurate & repeatable drilling operations. 11-inch Swing and 3-inch Stroke – Drill directly through the center of a circle measuring up to 11 inches in diameter and 3-inches in thickness. Belevling Work Table – Level the 11 inch diameter table 45 degree in either direction for angled drilling operation. Cast-Iron Base – The sturdy cast iron base prevent walking & wobbling during operation with. TableTilt: 0-45′ left and right. Table Size: 11 Diameter. Table Height Range: 19″ – 45″. Spindle Speeds: 16 (220, 290, 360, 430, 500, 570, 630, 760, 830, 920, 1430, 1620, 1850, 2260, 2580, 3600 RPM). Base Size: 9-1/2″(W) x 16″(L). Overall Dimension: 24-1/2″(L) x 14″(W) x 61-3/4(H). Floor Drill Press Machine. The item “Industrial Drill Press Floor Adjustable Table with Laser Guide Variable 16-Speed” is in sale since Wednesday, November 6, 2019. This item is in the category “Home & Garden\Yard, Garden & Outdoor Living\Outdoor Power Equipment\Log Splitters”. The seller is “hd-tool” and is located in Chino, California. This item can be shipped to United States.
- Brand: Stark USA
- Power Source: corded-electric
- Features: Variable Speed
- Model: Stationary Drill Press 16 Speed with Laser
- Voltage: 115
- MPN: Does Not Apply
- Power: Electric
- Material: Steel
- Color: Red/Black
- Item Width: 14
- Item Height: 61.75
- Style: Drilling Press for Shop
- Item Length: 24.5
- Type: Floor Drill Press
- wattage: 550
- Frame Material: Steel
- Amperage: 6.6
Categories: industrial
DEWALT 20 in. Variable-Speed Scroll Saw DW788 NO TABLE
Variable-Speed Scroll Saw – DW788 NO TABLE. The item “DEWALT 20 in. Variable-Speed Scroll Saw DW788 NO TABLE” is in sale since Tuesday, February 23, 2021. This item is in the category “Home & Garden\Tools & Workshop Equipment\Power Tools\Power Saws\Jig Saws”. The seller is “phoenix_treasures_llc” and is located in Tampa, Florida. This item can be shipped to United States, Canada, United Kingdom, Denmark, Romania, Slovakia, Bulgaria, Czech republic, Finland, Hungary, Latvia, Lithuania, Malta, Estonia, Australia, Greece, Portugal, Cyprus, Slovenia, Japan, China, Sweden, South Korea, Indonesia, Taiwan, South africa, Thailand, Belgium, France, Hong Kong, Ireland, Netherlands, Poland, Spain, Italy, Germany, Austria, Bahamas, Israel, Mexico, New Zealand, Philippines, Singapore, Switzerland, Norway, Saudi arabia, Ukraine, United arab emirates, Qatar, Kuwait, Bahrain, Croatia, Malaysia, Antigua and barbuda, Aruba, Belize, Dominica, Grenada, Saint kitts and nevis, Saint lucia, Montserrat, Turks and caicos islands, Barbados, Bangladesh, Bermuda, Brunei darussalam, Bolivia, Egypt, French guiana, Guernsey, Gibraltar, Guadeloupe, Iceland, Jersey, Jordan, Cambodia, Cayman islands, Liechtenstein, Sri lanka, Luxembourg, Monaco, Macao, Martinique, Maldives, Nicaragua, Oman, Pakistan, Paraguay, Reunion, Uruguay.
- Type: Jig Saws
- Features: Does not apply
- Brand: DEWALT
- Model: DW788
- Power Source: Corded Electric
- Number of Items in Set: 1
- Voltage: 120 V
- Cutting Depth: 2 in
- Color: Yellow
- Motor Type: Brushed
- Item Weight: 9 pounds
- Suitable For: Wood
- Battery Included: No
- Manufacturer Color: Yellow
- Cutting Angle: 45°
- MPN: DW788
Categories: dewalt